sexta-feira, julho 31, 2015

Network Analyzer App

Network Analyzer App



iphone app for ping, traceroute, etc

very nice...



itunes-link

quinta-feira, julho 30, 2015

How to install Recovery on Xperia Z3 with Locked Bootloader Sony Xperia Z3

[Guide]{Root}{Recovery} How to Root and inst… | Sony Xperia Z3 | XDA Forums



How to root Xperia Z3 with Locked Bootloader



How to root Xperia Z3 with Locked Bootloader


  • Move all your important data from Internal storage to a computer and remove SDcard (make this in case you loose something)
  • You need to have firmware version 23.0.A.2.93 (for D6603/D6653) or 23.0.F.1.74 (D6633_23.0.F.1.74_CE) (for D6633) installed on your phone. If not, please download ftf file and flash it with Flashtool (newer firmware versions will fail root:
D6603_23.0.A.2.93 | Mirror
D6653_23.0.A.2.93
D6633_23.0.F.1.74
  • Start the phone, don't make any initial setup. Skip it and go directly to Settings > About Phone. Tap 7 times on Buld number and a Developer options will be activated.
  • Go to Settings > Developer options and tick USB debugging an Allow mock locations.
  • Go to Settings > Security and tick Unknown sources, untick Verify apps.
  • Enter your phone in Flight mode
  • Download giefroot rooting tool v3 and extract the files on your PC (Windows only). [original thread: http://forum.xda-developers.com/cros...-4322-t3011598]
  • Connect your phone to the computer.
  • Start install.bat
  • If until that moment you have never connected you phone to this PC via adb you will get a popup message on you phone to authorize this computer. Do it.
  • The procedure will start. After a while your phone should restart by itself.
  • After the phone boots up wait until a popup from SuperSu appears asking for adb shell root rights. Do it.
  • When you give the permission you have to see on the computer the sign "Device rooted".
  • If it says Device not rooted repeat all the steps running install.bat again.



Big thanks to:
@zxz0O0
@serajr
and to all involved



How to install Recovery on Xperia Z3 with Locked Bootloader
 
  • Download Z3 Dualrecovery on your computer. (If the link is broken go to http://nut.xperia-files.com/ > XZDualRecovery and look for Z3 installer)
  • Extract the zip on your PC and start install.bat
  • Choose option 1 and follow the on screen instructions.
  • The phone will test reboot to Team Win Recovery.
  • Restart your phone and you are good to go.
  • You now will have a new application NDR Utils, which can easily boot you phone to the chosen recovery.

Big thanks to:
@[NUT]
and to all involved


Procedure:

1. Get root on old firmware with @zxz0O0 masterpiece tool (OP) and install Dual Recovery by @[NUT]
PS To install dual recovery I had first to install latest busybox using busybox installer (busybox.net)
2. Create a pre-rooted firmware from latest .77 fw ftf with the not less outstanding PRFCreatortool, including latestSuperSU and Dual Recovery flashable zips (just follow thread instructions)
3. Put pre-rooted firmware flashable zip at internal memory (/sdcard0)
4. Open NDR Utils app and reboot into TWRP recovery
5. Flash pre-rooted firmware and then... POWER OFF device (DO NOT REBOOT)
6. Open FlashTool and flash latest .77 fw - EXCLUDING System !!!
7. Done!

You will get latest .77 fw rooted with dual recovery installed!
Above procedure must work to get lollipop rooted too (from KK to L)!


--


Camera 
DRM Function Restore
https://forum.xda-developers.com/z3/general/drm-function-restore-t2995798

1.Flash ftf file "23.0.1.A.5.77" by Flashtool. - Wipe appslog, cache, data - and reset customizations
2.Relock bootloader by Flashtool.
3.Flash ftf file "23.0.1.A.5.77" by Flashtool AGAIN. - Wipe appslog, cache, data
4.Unlock bootloader by Flashtool.
5.Flash boot.img "AndroPlusKernel v12" by Fastboot.
6.Install DRM restore zip by TWRP.
7.reboot.

Requirements:
Unlocked bootloader
flashtool 
.77 based firmware for D6653 (I tried several firmwares but the one that worked for me was the .77 firmware for PH market downloaded from flashtool)
AndrosPlusKernel v15 (extracted boot.img from the zip to be flashed)
DRM restore zip from that original thread above (placed in sd card)

Note - Key here is to not restart/boot the phone after each step in the instructions above. Just keep phone off and unplugged after each step. I realized that leaving the phone connected in flashmode for a while will make it boot, so I just unplugged it while waiting for flashtool to prepare FTF for flashing. Then plug it in again with vol down button pressed.

[ROOT] [XPERIA Z2/Z3] [ANDROID 5 LOLLIPOP EA… | Sony Xperia Z3

[ROOT] [XPERIA Z2/Z3] [ANDROID 5 LOLLIPOP EA… | Sony Xperia Z2 | XDA Forums







Look at the xda forum first



NOT COMPATİBLE WITH ANDROİD 5.1

[LAST UPDATE] [12.06.2015]

XPERIA ANDROID 5 LOLLIPOP EASY ROOT :

ALL LOCKED&UNLOCKED BOOTLOADERS.


1-) Copy ALP folder in phone memory.
2-) Settings >Security > Unknown sources make it open. And Settings > Developer Options > USB debugging make it on. (If developer options exist go Settings > About phone and click Build number (7 times)) 
3-) Install Root.apk Allow all messages.
4-) Install Recovery.apk
5-) Install Busybox.apk
6-) Open KingRoot and click Root button.
6-) Wait to complete. İf you see a chinese blue button click it. All of messages you will allow.
7-) When you see blue tick symbol or %100 its ok.
8-) Look to the menu KingUser its in here ok. No problem don't open it.
9-) Open busybox and install it. When you see It looks like busybox installed succesfully congratulations message its ok. 
10-) Open XZRecovery and click Install Recovery .
11-) Phone will be reboot and recovery will open.
12-) Install > find ALP folder and select SuperSU.zip then swipe and install it.
13-) Complete the install Wipe Cache/Dalvik and reboot the phone.
14-) You can see SuperSU in menu and check with rootchecker your root access.
15-) Everything OK. You can enjoy with your rooted Android 5 lollipop device.
16-) You can uninstall KingRoot, busybox, Xzrecovery app. (won't delete supersu or ndrutils) 

PREPARED BY ALPEREN ÇUBUK.

DOWNLOAD LİNK : https://yadi.sk/d/qMsejobDgedBw

MIRROR :
https://app.box.com/s/86e7vlwfmu5z62lo95vu2kfej38uj01q

NOTE: Extract downloaded zip and copy ALP folder your phone memory.

NOTE: XPERİA Z2, Z3 and Z3C ANDROİD 5.0.2 (23.1.A.1.28) TESTED AND SUCCESFULLY.

NOTE: Other phones (etc Z1) won't install Recovery.apk (skip 4. and 10. Step) they need install recovery with nuts dualrecovery http://nut.xperia-files.com/ download your phones INSTALLER zip and after the 9. Step connect your phone pc with usb. Open install bat in zip write 2 and press enter. Allow messages on phone. 

NOTE: If you couldn't open recovery you need flash stock firmware with flashtool (won't need wipe) then try all steps again.

quarta-feira, julho 22, 2015

How to Un-Brick a TP-LINK Router(WR740N) TL-WR740N

How to Un-Brick a TP-LINK Wireless Router(WR740N) ; TL-WR740N
**Would Work For Any Router Of TP-LINK Newer Than And WR740N**

What You Would Need;
1. Bricked Router Here(TP-LINK WR740N) 
2. Your Router's Stock Firmware
3. An Ethernet Cable(Comes In The Box)
4. TFTP Utils (TFPTUtil is an open source TFTP server written in C#.
http://sourceforge.net/projects/tftputil
--
better use this TFTP Server
do not register as service.
open cmd.exe window on c:\OpenTFTPServer\
run -> RunStandAloneMT.bat (with this it will output whatever the router does)
http://sourceforge.net/projects/tftp-server/
change OpenTFTPServerMT.ini in section [LISTEN-ON] should have 192.168.0.66

--
Latest version can be downloaded using subversion at:
https://cvn.sourceforge.net/cvnroot/t... )
5. A Matchstick
6. A Brain(I'm Sorry Don't Have Any Link To Download a Brain :/)

Steps To Un-Brick: 
1. Turn Off The Router My Friend Is Helping Me Here 
2. Connect The Ethernet Cable To PC And Router's WAN Port
3. Tell Your Computer To Setup a Static IP and Subnet Mask i.e IP(192.168.0.66) Subnet Mask(255.255.255.0) [Shown In The Video :) ] 
5. Start TFTP Utils
6. Copy The Firmware And Put It In TFTP Utils Root Directory
7. Rename It To " wr740v4_tp_recovery "
8. Take a Matchstick and Press The Reset Button(Keep Pressing Until I Tell You :P
9. Now Turn On The Router While Pressing The Reset Button
10. Keep Pressing For a Second Or 2 The WAN Light Would Light Up 
11. Let TFTP Utils To Listen On Your Ethernet Card's IP(Very Important)
12. Follow Steps 8, 9 And 10 Again! After Turning Router Off 
13. The Router Will Automatically Start Pulling The Firmware From Your PC And Install It Afterwards
14. Wait For a Few Minutes And Let The Router Restart
15. Enjoy Your Un-Bricked Router! 

sexta-feira, julho 17, 2015

MailTrack Tells You When Someone Has Read Your Email Message

MailTrack Tells You When Someone Has Read Your Email Message


Enable read receipts

gmail flag if was opened

gmail read email flag

gmail read email notification



Chrome: Corporate email systems often have ways of telling you if an email is read. For users of Gmail in Chrome, MailTrack creates easy read receipts.
MailTrack, like other read receipt extensions, puts a tiny image in the outgoing email that displays when a recipient opens the email. We've covered apps that do this before, but MailTrack is much easier to use if all you need is a simple notification when someone opens your email.


Note: If the recipient turns off automatic image loading, you won't get a read receipt. What I really like about this free extension is that it not only shows if the email was read, but with which device it was first read on. Just check sent items and a green checkmark will show when an email is read. You can also receive email notifications when the email is read.
If you install the extension, go to the dashboard and remove the signature at the bottom to avoid advertising while you use it.

domingo, julho 12, 2015

Quick list of Optware packages - DD-WRT Wiki

Quick list of Optware packages - DD-WRT Wiki





asus rt-n68
asus router firmware
merlin


1244 packages as of July 26th, 2011: 11 packages added from last August

  • abook - 0.5.6-2 - Abook is a text-based addressbook program designed to use with mutt mail client.
  • ack - 1.94-1 - grep-like text finder
  • adduser - 1.10.3-1 - a multi-call binary for login and user account administration
  • adns - 1.4-2 - Asynchronous resolver library and DNS resolver utilities.
  • aget - 0.4.1-1 - Aget is a multithreaded HTTP download accelerator.
  • aiccu - 20070115-2 - Automatic IPv6 Connectivity Client Utility.
  • alac-decoder - 0.1.0-2 - A decoder for the apple lossless file format
  • alsa-lib - 1.0.23-1 - ALSA sound library
  • alsa-utils - 1.0.23-1 - ALSA utils
  • amavisd-new - 2.4.5-3 - amavisd-new is a high-performance interface between mailer (MTA) and content checkers
  • amule - 2.3.1rc1-2 - non-gui part of aMule ed2k client (amuled,amulweb,amulecmd)
  • analog - 6.0-2 - The most popular logfile analyser in the world.
  • antinat - 0.90-4 - Antinat is a flexible SOCKS server and client library for writing proxy-based applications.
  • apache - 2.2.18-1 - The most popular web server on the internet
  • apache-manual - 2.2.18-1 - Online documentation for the apache webserver
  • apcupsd - 3.14.8-1 - A daemon for controlling APC UPSes
  • apcupsd-cgi - 3.14.8-1 - A daemon for controlling APC UPSes, web interface
  • appweb - 2.1.0-2 - AppWeb is the leading web server technology for embedding in devices and applications. Supports embedded javascript, CGI, Virtu
  • apr - 1.3.12-1 - Apache Portable Runtime library
  • apr-util - 1.3.9-1 - Apache Portable Runtime utilities library
  • arc - 5.21o-1 - arc - Arc archiver
  • aria2 - 1.12.0-1 - A utility for downloading files. The supported protocols are HTTP(S), FTP, BitTorrent (DHT, PEX, MSE/PE), and Metalink.
  • arping - 2.09-1 - Arping is an ARP level ping utility.
  • arpwatch - 2.1a15-3 - The ethernet monitor program; for keeping track of ethernet/ip address pairings.
  • aspell - 0.60.5-1 - Spell checker
  • asterisk - 1.2.24-1 - Open Source VoIP PBX System
  • asterisk-gui - 2.0.4-1 - Asterisk-GUI is a framework for the creation of graphical interfaces for configuring Asterisk.
  • asterisk-sounds - 1.2.1-1 - Supplementary asterisk-sounds.
  • asterisk14 - 1.4.22.1-1 - Asterisk is an Open Source PBX and telephony toolkit.
  • asterisk14-chan-capi - 1.0.1-1 - capi module for asterisk
  • asterisk14-core-sounds-en-alaw - 1.4.19-1 - asterisk-core-sounds-en-alaw
  • asterisk14-core-sounds-en-g729 - 1.4.19-1 - asterisk-core-sounds-en-g729
  • asterisk14-core-sounds-en-gsm - 1.4.19-1 - asterisk-core-sounds-en-gsm
  • asterisk14-core-sounds-en-ulaw - 1.4.19-1 - asterisk-core-sounds-en-ulaw
  • asterisk14-extra-sounds-en-alaw - 1.4.11-1 - asterisk-extra-sounds-en-alaw
  • asterisk14-extra-sounds-en-g729 - 1.4.11-1 - asterisk-extra-sounds-en-g729
  • asterisk14-extra-sounds-en-gsm - 1.4.11-1 - asterisk-extra-sounds-en-gsm
  • asterisk14-extra-sounds-en-ulaw - 1.4.11-1 - asterisk-extra-sounds-en-ulaw
  • asterisk14-moh-freeplay-alaw - 0.0.0-1 - asterisk-moh-freeplay-alaw
  • asterisk14-moh-freeplay-g729 - 0.0.0-1 - asterisk-moh-freeplay-g729
  • asterisk14-moh-freeplay-gsm - 0.0.0-1 - asterisk-moh-freeplay-gsm
  • asterisk14-moh-freeplay-ulaw - 0.0.0-1 - asterisk-moh-freeplay-ulaw
  • asterisk14-moh-opsound-alaw - 2.03-1 - asterisk-moh-opsound-alaw
  • asterisk14-moh-opsound-g729 - 2.03-1 - asterisk-moh-opsound-g729
  • asterisk14-moh-opsound-gsm - 2.03-1 - asterisk-moh-opsound-gsm
  • asterisk14-moh-opsound-ulaw - 2.03-1 - asterisk-moh-opsound-ulaw
  • asterisk16 - 1.6.2.13-1 - Asterisk is an Open Source PBX and telephony toolkit.
  • asterisk16-addons - 1.6.2.2-2 - Asterisk extras
  • asterisk18 - 1.8.5.0-1 - Asterisk is an Open Source PBX and telephony toolkit.
  • at - 3.1.8-5 - Delayed job execution and batch processing.
  • atftp - 0.7-9 - Advanced TFTP server and client
  • atk - 1.26.0-1 - GNOME accessibility toolkit
  • atop - 1.21-1 - A better top with history monitoring
  • audiofile - 0.2.6-6 - Misc Audio Libraries.
  • autoconf - 2.68-1 - Creating scripts to configure source code packages using templates
  • automake - 1.11.1-2 - Creates GNU standards-compliant Makefiles from template files
  • autossh - 1.4b-1 - Automatically restart SSH sessions and tunnels.
  • avahi - 0.6.30-1 - A system for multicast DNS service discovery, an implementation of Zeroconf.
  • bacula - 3.0.3-1 - A set of Open Source, enterprise ready, computer programs to manage backup, recovery, and verification of computer data across
  • bash - 3.2.49-1 - A bourne style shell
  • bash-completion - 1.2-1 - Programmable completion for the bash shell
  • bc - 1.06-2 - GNU bc is an arbitrary precision numeric processing language
  • bftpd - 3.5-1 - bftpd is a very configurable Linux FTP server which can do chroot without special configuration or directory preparation.
  • bind - 9.6.1.3-4 - Bind provides a full name server package, including zone masters, slaves, zone transfers, security multiple views. This is THE
  • bip - 0.8.8-1 - multi user irc proxy
  • bison - 2.4.1-1 - a general-purpose parser generator that converts an annotated context-free grammar into an LALR(1) or GLR parser for that gramm
  • bitchx - 1.1a-final-1 - Text mode IRC client
  • bitlbee - 3.0.3-1 - A gateway between IRC and proprietary IM networks
  • bluez-hcidump - 1.42-1 - Bluetooth packet analyzer.
  • bluez-libs - 3.36-1 - Bluetooth libraries.
  • bluez-utils - 3.36-3 - Bluetooth utilities.
  • bluez2-libs - 2.25-1 - Bluetooth libraries.
  • bluez2-utils - 2.25-6 - Bluetooth utilities.
  • bogofilter - 1.2.1-1 - A fast Bayesian spam filter
  • bridge-utils - 1.2-1 - Describe bridge-utils here.
  • bsdgames - 2.17-1 - A collection of classic textual Unix games.
  • bsdmainutils - 6.1.6-5 - Small programs many people expect to find when they use a BSD-style Unix system.
  • btpd - 0.16-1 - BTPD is a bittorrent client consisting of a daemon and a cli client, which can be used to read and/or manipulate the daemon sta
  • buildroot - 4.1.1-13 - uClibc compilation toolchain
  • busybox - 1.10.3-1 - A userland replacement for embedded systems.
  • busybox-base - 1.10.3-1 - A userland replacement for embedded systems.
  • busybox-links - 1.10.3-1 - A userland replacement for embedded systems.
  • byrequest - cvs-2005-11-15-2 - TiVo HMO server
  • bzip2 - 1.0.6-1 - Very high-quality data compression program
  • c-ares - 1.7.4-1 - C library that performs DNS requests and name resolves asynchronously
  • cabextract - 1.4-1 - cabextract - Program to extract Microsoft Cabinet files
  • cadaver - 0.23.2-2 - Command-line WebDAV client.
  • calc - 2.12.4.0-1 - Calc is arbitrary precision arithmetic system that uses a C-like language.
  • calcurse - 2.9.0-1 - Calcurse is a text-based personal organizer which helps keeping track of events and everyday tasks.
  • castget - 1.0.1-2 - castget is a simple, command-line based RSS enclosure downloader, primarily intended for automatic, unattended downloading of p
  • catdoc - 0.94.2-1 - catdoc can extract text from Microsoft word files, and xls2csv does roughly same for Excel files.
  • ccollect - 0.8-1 - (pseudo) incremental backup with exclude lists using hardlinks and rsync.
  • ccrypt - 1.9-1 - Secure encryption and decryption of files and streams
  • ccxstream - 1.0.15-4 - A server to stream music and video to an XBox running Xbox Media Player using XBMSP protocol
  • cdargs - 1.35-1 - CDargs heavily enhances the navigation of the common linux file-system inside the shell. It plugs into the shell built-in cd-co
  • cdrtools - 2.01-6 - low-level CD recording tools: cdrecord, mkisofs, etc.
  • cherokee - 1.0.19-1 - A flexible, very fast, lightweight web server.
  • cherokee-admin - 1.0.19-1 - admin web app for cherokee web server
  • cherokee-dev - 1.0.19-1 - Development files for cherokee web server
  • cherokee-doc - 1.0.19-1 - Documentation for cherokee web server
  • chicken - 2.6-1 - A practical and portable Scheme system.
  • chillispot - 1.1.0-1 - ChilliSpot is an open source captive portal or wireless LAN access point controller.
  • chrpath - 0.13-1 - chrpath allows you to modify the dynamic library load path (rpath and runpath) of compiled programs and libraries.
  • cksfv - 1.3.14-1 - Check SFV (Simple File Verification)
  • clamav - 0.96-1 - Clam ANtivirus is a GPL anti-virus toolkit for UNIX
  • classpath - 0.98-1 - GNU Classpath for java
  • clearsilver - 0.10.5-1 - A fast, powerful, and language-neutral HTML template system.
  • climm - 0.7-1 - A very portable text-mode ICQ clone.
  • clips - 6.24-3 - C Language Integrated Production System, a a productive development and delivery expert system tool.
  • clips-dev - 6.24-3 - C Language Integrated Production System, a a productive development and delivery expert system tool., header files
  • cmdftp - 0.9.7-1 - cmdftp is a tiny command line FTP client that features shell-like functions, passive mode, local and remote transparent modes,
  • colordiff - 1.0.9-1 - Colour-highlighted 'diff' output.
  • confuse - 2.7-2 - a configuration file parser library
  • connect - 1.96-1 - A simple relaying command to make network connection via SOCKS and https proxy.
  • coreutils - 8.4-1 - Bunch of heavyweight *nix core utilities
  • corkscrew - 2.0-1 - Corkscrew enables the user to run SSH connections over most HTTP and HTTPS proxy servers.
  • cowsay - 3.03-3 - A Configurable Speaking/Thinking Cow
  • cpio - 2.9-3 - file archive utility
  • cpufrequtils - 006-2 - To make access to the Linux kernel cpufreq subsystem easier for users and cpufreq userspace tools, a cpufrequtils package was c
  • cron - 4.1-8 - Standard vixie cron, with cron.d addition
  • cryptcat - 1.2.1-1 - Cryptcat is the standard netcat enhanced with twofish encryption
  • cscope - 15.7a-2 - A tool for developer to browse source code.
  • ctags - 5.8-1 - Ctags generates an index (or tag) file of language objects found in source files that allows these items to be quickly and easi
  • ctcs - 1.4.1-10 - CTorrent Control Server (CTCS) is an interface for monitoring and managing Enhanced CTorrent clients
  • ctorrent - 1.3.4-2 - CTorrent is a BitTorrent client written in the C programming language.
  • ctrlproxy - 3.0.8-1 - An IRC server with multiserver support.
  • cuetools - 1.3.1-1 - cuetools is a set of utilities for working with cue files and toc files.
  • cups - 1.4.6-1 - Common Unix Printing System
  • cups-dev - 1.4.6-1 - Development files for CUPS
  • cups-doc - 1.4.6-1 - Common Unix Printing System documentation.
  • cups-driver-gutenprint - 5.2.6-1 - CUPS driver from Gutenprint.
  • cups-locale-da - 1.4.6-1 - CUPS documentation, template and locale files for da
  • cups-locale-de - 1.4.6-1 - CUPS documentation, template and locale files for de
  • cups-locale-es - 1.4.6-1 - CUPS documentation, template and locale files for es
  • cups-locale-eu - 1.4.6-1 - CUPS documentation, template and locale files for eu
  • cups-locale-fi - 1.4.6-1 - CUPS documentation, template and locale files for fi
  • cups-locale-fr - 1.4.6-1 - CUPS documentation, template and locale files for fr
  • cups-locale-id - 1.4.6-1 - CUPS documentation, template and locale files for id
  • cups-locale-it - 1.4.6-1 - CUPS documentation, template and locale files for it
  • cups-locale-ja - 1.4.6-1 - CUPS documentation, template and locale files for ja
  • cups-locale-ko - 1.4.6-1 - CUPS documentation, template and locale files for ko
  • cups-locale-nl - 1.4.6-1 - CUPS documentation, template and locale files for nl
  • cups-locale-no - 1.4.6-1 - CUPS documentation, template and locale files for no
  • cups-locale-pl - 1.4.6-1 - CUPS documentation, template and locale files for pl
  • cups-locale-pt - 1.4.6-1 - CUPS documentation, template and locale files for pt
  • cups-locale-pt-br - 1.4.6-1 - CUPS documentation, template and locale files for pt-br
  • cups-locale-ru - 1.4.6-1 - CUPS documentation, template and locale files for ru
  • cups-locale-sv - 1.4.6-1 - CUPS documentation, template and locale files for sv
  • cups-locale-zh - 1.4.6-1 - CUPS documentation, template and locale files for zh
  • cups-locale-zh-tw - 1.4.6-1 - CUPS documentation, template and locale files for zh-tw
  • cups-pdf - 2.5.1-1 - CUPS-PDF provides a PDF Writer backend to CUPS. This can be used as a virtual printer in a paperless network.
  • cvs - 1.11.23-1 - Concurrent versioning system.
  • cyrus-imapd - 2.2.12-15 - The Carnegie Mellon University Cyrus IMAP Server
  • cyrus-imapd-devel - 2.2.12-15 - The Carnegie Mellon University Cyrus IMAP Server
  • cyrus-imapd-doc - 2.2.12-15 - The Carnegie Mellon University Cyrus IMAP Server
  • cyrus-sasl - 2.1.23-2 - Provides client or server side authentication (see RFC 2222).
  • cyrus-sasl-libs - 2.1.23-2 - Provides client or server side authentication (see RFC 2222).
  • dash - 0.5.6.1-1 - dash (Debian Almquist Shell) is a POSIX compliant shell that is much smaller than bash.
  • davtools - 1.2.0-1 - Disk Allocation Viewer - obtain the state of fragmentation on disk.
  • dbus - 1.2.16-1 - D-Bus is a message bus system, a simple way for applications to talk to one another.
  • dbus-glib - 0.82-1 - D-Bus Glib bindings
  • dcled - 1.7-1 - Userland driver for Dream Cheeky USB LED Message Board.
  • dcraw - 1.376-2 - Decoding raw digital photos.
  • ddclient - 3.8.1-1 - A client for updating dynamic DNS entries for accounts on a number of dynamic DNS providers.
  • denyhosts - 1.1.2-5 - DenyHosts is a script intended to be run by Linux system administrators to help thwart ssh server attacks. If you've ever looke
  • dev-pts - 5.5-1 - Enables unix98-style ptys on unslung.
  • devio - 1.2-1 - A command line program intended to read and write from block devices
  • devmem2 - 1.0-1 - Simple program to read/write from/to any location in memory
  • dfu-util - r3095-3 - USB Device Firmware Upgrade utility
  • dhcp - 4.1-ESV-R2-1 - A DHCP Server
  • dict - 1.11.2-1 - DICT Protocol (RFC 2229) Client.
  • diffstat - 1.54-1 - Diffstat reads the output of the diff command and displays a histogram of the insertions, deletions, and modifications in each
  • diffutils - 3.0-1 - contains gnu diff, cmp, sdiff and diff3 to display differences between and among text files
  • digitemp - 3.6.0-1 - Reads 1-Wire Temperature sensor (http://www.digitemp.com)
  • dircproxy - 1.1.0-1 - IRC proxy server
  • discount - 2.1.1.1-1 - Markdown text to HTML, in C.
  • distcc - 3.1-1 - distributes builds across a local network
  • dmsetup - 1.02.22-1 - Userspace library and tool for the Linux Kernel Device Mapper.
  • dnsmasq - 2.57-1 - DNS and DHCP server
  • dnstracer - 1.9-1 - dnstracer determines where a given Domain Name Server (DNS) gets its information from, and follows the chain of DNS servers bac
  • dokuwiki - 2010-11-07-1 - DokuWiki is a standards compliant, simple to use Wiki
  • dosfstools - 3.0.9-1 - Utilities to create and check MS-DOS FAT filesystems.
  • dovecot - 1.2.0.beta1-2 - Dovecot secure IMAP server
  • dovecot-doc - 1.2.0.beta1-2 - Dovecot documentation
  • dropbear - 0.52-5 - Lightweight SSH client and server system
  • drraw - 2.2a4-2 - Simple web based presentation front-end for RRDtool.
  • dspam - 3.9.0-1 - DSPAM is a scalable and open-source content-based spam filter designed for multi-user enterprise systems.
  • dspam-mysql - 3.9.0-1 - DSPAM is a scalable and open-source content-based spam filter designed for multi-user enterprise systems.
  • dspam-pgsql - 3.9.0-1 - DSPAM is a scalable and open-source content-based spam filter designed for multi-user enterprise systems.
  • dstat - 0.7.0-1 - dstat is a versatile replacement for vmstat, iostat, netstat, nfsstat, and ifstat
  • dtach - 0.8-1 - A program that emulates the detach feature of screen.
  • dump - 0.4b41-3 - Dump/Restore ext2/ext3 filesystem backup
  • e2fslibs - 1.41.12-1 - Ext2 Filesystem Libraries
  • e2fslibs-dev - 1.41.12-1 - Ext2 Filesystem Libraries, development files
  • e2fsprogs - 1.41.12-1 - Ext2 Filesystem Utilities
  • e2tools - 0.0.16-3 - Ext2 tools
  • eaccelerator - 0.9.5.3-5.2.17-1 - Yet another php cache / accelerator
  • easy-rsa - 2.0rc1SAN-3 - Describe easy-rsa here.
  • ecl - 0.9i-2 - Embeddable Common-Lisp
  • ed - 1.5-1 - Line editor
  • eggdrop - 1.6.19-3 - Eggdrop is a popular Open Source IRC bot
  • electric-fence - 2.1.14.1-1 - C memory debugging library
  • elinks - 0.11.7-1 - Full-Featured Text WWW Browser
  • emacs22 - 22.3-1 - Emacs is the extensible, customizable, self-documenting real-time display editor.
  • endian - 1.0-1 - Report endianness of a system to the standard output as little, big, or mixed.
  • enhanced-ctorrent - dnh3.3.2-11 - Enhanced CTorrent is a revised version of CTorrent
  • enscript - 1.6.4-1 - GNU enscript converts ASCII files to PostScript and spools generated PostScript output to the specified printer or leaves it to
  • erl-yaws - 1.89-1 - Yet Another Web Server.
  • erlang - R14B.03-1 - A dynamic programming language and runtime environment, with built-in support for concurrency, distribution and fault tolerance
  • erlang-doc-html - R14B.03-1 - HTML doc for erlang
  • erlang-libs - R14B.03-1 - full libs for erlang
  • erlang-manpages - R14B.03-1 - man pages for erlang
  • esmtp - 1.2-1 - esmtp is a user configurable relay-only Mail Transfer Agent (MTA) with a sendmail compatible syntax.
  • esniper - 2.25.0-1 - A lightweight eBay sniping tool
  • esound - 0.2.41-2 - The Enlighted Sound Daemon.
  • ettercap - 0.6.b-2 - Ettercap is a suite for man in the middle attacks on LAN. It features sniffing of live connections, content filtering on the fl
  • ettercap-ng - 0.7.3-1 - Ettercap is a suite for man in the middle attacks on LAN. It features sniffing of live connections, content filtering on the fl
  • eventlog - 0.2.7-1 - library needed by syslog-ng
  • exif - 0.6.19-1 - A small command-line utility to show and change EXIF information in JPEG files.
  • expat - 2.0.1-1 - XML Parser library
  • extract-xiso - 2.5-1 - Extract-xiso is the premier backup tool for creating and extracting disc image .iso's of XBox games.
  • ez-ipupdate - 3.0.11b7-2 - A small utility for updating your host name for several dynamic DNS services.
  • faad2 - 2.6-3 - Freeware Advanced Audio Coder
  • fann - 2.0.0-1 - Fast Artificial Neural Network Library is a free open source neural network library.
  • fatresize - 1.0.2-1 - Describe fatresize here.
  • fbcat - 0.2-1 - fbcat takes a screenshot using the framebuffer device.
  • fconfig - 20060419-1 - Tool to edit the Redboot config from userspace.
  • fdupes - 1.40-1 - FDUPES is a program for identifying or deleting duplicate files residing within specified directories.
  • fetchmail - 6.3.20-1 - A remote mail retrieval and forwarding utility
  • ffmpeg - 0.svn20080409-3 - FFmpeg is an audio/video conversion tool.
  • ficy - 1.0.15-2 - an icecast/shoutcast stream grabber suite
  • file - 5.07-1 - Ubiquitous file identification utility.
  • finch - 2.7.11-2 - Finch is a console-based IM program that lets you sign on to AIM, Jabber, MSN, Yahoo!, and other IM networks. It uses ncurses.
  • findutils - 4.2.32-1 - File finding utilities
  • findutils-doc - 4.2.32-1 - Documentation for file finding utilities
  • firedrill-httptunnel - 1.3.2-1 - A small application for tunnelling an arbitrary TCP socket connection over HTTP.
  • fis - r6-2 - Tool to edit the Redboot FIS partition layout from userspace.
  • fixesext - 2.0.1+cvs20050130-2 - X fixes extension headers
  • flac - 1.2.1-1 - FLAC is a free lossless audio codec. This package contains the codec libraries and the command-line tools flac and metaflac.
  • flex - 2.5.35-1 - Generates programs that perform pattern-matching on text.
  • flip - 20050821-1 - Utility program to convert text files between UNIX or Mac newlines and DOS linefeed + newlines.
  • fontconfig - 2.8.0-0 - Font configuration library
  • fossil-scm - 20090916-1 - Simple, high-reliability, distributed software configuration management
  • freecell - 1.0-1 - Freecell is a console (ncurses) version of the popular solitaire game Freecell. It supports the standard Microsoft compatible g
  • freeradius - 2.0.5-3 - An open source RADIUS server.
  • freeradius-doc - 2.0.5-3 - An open source RADIUS server.
  • freetds - 0.82-4 - A free re-implementation of the Tabular Data Stream protocol for Sybase or MS SQL Server.
  • freetype - 2.3.6-1 - Free truetype library
  • freeze - 2.5.0-1 - freeze - archiver and compressor
  • fribidi - 0.10.9-1 - An implementation of the Unicode Bidirectional Algorithm (bidi).
  • fslint - 2.26-1 - A utility to find and clean various forms of lint on a filesystem.
  • ftpcopy - 0.6.7-3 - A simple FTP client written to copy files or directories (recursively) from a FTP server.
  • ftpd-topfield - 0.7.7-0 - FTPD for the Topfield TF5000PVRt
  • fuppes - SVN-578-1 - FUPPES is a free, multiplatform UPnP (TM) A/V MediaServer, with optional on-the-fly audio transcondig from ogg/vorbis, mpc/muse
  • gawk - 4.0.0-1 - Gnu AWK interpreter
  • gcal - 3.01-1 - Gcal calculates and prints calendars.
  • gconv-modules - 2.2.5-7 - Provides gconv modules missing from the firmware. These are used by glibc iconv() implementation.
  • gdb - 6.8-2 - gdb is the standard GNU debugger
  • gdbm - 1.8.3-2 - GNU dbm is a set of database routines that use extensible hashing. It works similar to the standard UNIX dbm routines.
  • gdchart - 0.11.5dev-2 - Easy to use C API for create charts and graphs in PNG, GIF and WBMP format.
  • geoip - 1.4.5-1 - API and example lookup program to determine country, state/region, city, etc. from IP addresses.
  • getopt - 2.15-2 - The getopt utility from the util-linux-ng package.
  • gettext - 0.14.5-2 - Set of tools for producing multi-lingual messages
  • ggrab - 0.22a-2 - Grabbing and streaming of mpeg2 streams to/from. Good with dreambox.
  • ghostscript - 8.71-2 - An interpreter for the PostScript (TM) language
  • gift - 0.11.8.1-5 - gIFt is a multi-platform multi-networks peer-to-peer client. gIFt runs as a daemon on the computer. It can be controlled using
  • gift-ares - 0.3.0-2 - giFT ares plugin
  • gift-fasttrack - 0.8.9-1 - gIFt fasttrack plugin
  • gift-gnutella - 0.0.11-1 - gIFt Gnutella plugin
  • gift-openft - 0.2.1.6-1 - gIFt openft plugin
  • gift-opennap - 20050212-2 - gIFt opennap plugin
  • giftcurs - 0.6.2-2 - giFTcurs is a curses front end to the giFT daemon
  • git - 1.7.6-1 - GIT is a directory tree content manager that can be used for distributed revision control.
  • git-lite - 1.6.6.2-1 - GIT is a directory tree content manager that can be used for distributed revision control.
  • git-manpages - 1.7.6-1 - manpages of git
  • git-svn - 1.7.6-1 - git as svn client
  • gitosis - git20090917-1 - Git repository hosting application.
  • gkrellmd - 2.3.2-3 - Gkrellm is a utility to display system stats (cpu, processes, memory,..) in a nice little window. (Server component)
  • glib - 2.20.4-1 - The GLib library of C routines.
  • gnet - 2.0.8-1 - A simple network library written in C, object-oriented, and built upon GLib.
  • gnokii - 0.6.28.1-1 - a multisystem tool suite and modem driver for the mobile phones
  • gnokii-smsd - 0.6.28.1-1 - A gnokii sms daemon
  • gnokii-smsd-mysql - 0.6.28.1-1 - A gnokii sms daemon
  • gnu-httptunnel - 3.3-1 - httptunnel creates a bidirectional virtual data connection tunnelled in HTTP requests.
  • gnugo - 3.6-2 - A free program that plays the game of Go.
  • gnupg - 2.0.17-1 - GNU privacy guard - a free PGP replacement.
  • gnupg1 - 1.4.11-1 - GNU privacy guard - a free PGP replacement.
  • gnuplot - 4.4.1-1 - Command-line driven interactive data and function plotting utility
  • gnutls - 2.6.5-1 - GNU Transport Layer Security Library.
  • gnutls-dev - 2.6.5-1 - Development files for GNUTLS
  • gpgme - 1.1.4-1 - GnuPG Made Easy.
  • gphoto2 - 2.4.1-1 - Command line digital camera software applications
  • gpsd - 2.37-1 - A daemon that communicates with GPS receiver and provides data to other applications.
  • grep - 2.9-1 - Global regular expression parser
  • groff - 1.19.2-2 - front-end for the groff document formatting system
  • gsasl - 1.6.1-1 - GNU SASL command line utility.
  • gsnmp - 0.2.0-1 - SNMP lib.
  • gtmess - 0.94-1 - Describe gtmess here.
  • gtypist - 2.8.3-1 - A universal typing tutor.
  • gutenprint - 5.2.6-1 - Gutenprint.
  • gzip - 1.2.4a-4 - GNU Zip data compression program
  • haproxy - 1.4.15-1 - Reliable, high performance TCP/HTTP load balancer.
  • haserl - 0.9.25-1 - Haserl is a small program that uses shell or Lua script to create cgi web scripts.
  • hd2u - 1.0.3-1 - Hanys Dos2Unix
  • hdparm - 9.37-1 - Linux hard drive parameter utility
  • hello - 2.7-1 - The gnu implementation of the clasical 'hello world' example from Kerningham and Ritchie
  • hexcurse - 1.55-2 - A versatile ncurses-based hex editor.
  • heyu - 2.8.0-1 - X10 home automation control using the CM11A
  • hiawatha - 7.5-1 - Hiawatha is a webserver for Unix with 'being secure' as its main goal.
  • hnb - 1.9.17-2 - Hierarchical notebook(hnb) is a curses program to structure many kinds of data in one place.
  • hpijs - 2.1.4-1 - Printer support for HP printer
  • hping - 20051105-4 - A command-line oriented TCP/IP packet assembler/analyzer.
  • hplip - 3.11.3a-1 - HP Linux Imaging and Printing
  • htop - 0.8.3-2 - An interactive process viewer.
  • httping - 1.4.3-1 - httping is a ping-like tool for HTTP requests. Give it a URL and it will show how long it takes to connect, send a request, and
  • icecast - 2.3.2-1 - A free server software for streaming multimedia.
  • ices0 - 0.4-2 - source client for broadcasting in MP3 format to an icecast2 server
  • id3lib - 3.8.3-4 - Library for reading, writing, and manipulating ID3v1 and ID3v2 tags.
  • iftop - 0.17-4 - Display bandwidth usage on an interface by host
  • ii - 1.6-1 - ii is a minimalist FIFO and filesystem-based IRC client.
  • iksemel - 1.4-1 - iksemel is an XML (eXtensible Markup Language) parser library designed for Jabber applications
  • imagemagick - 6.6.9.1-1 - A set of image processing utilities.
  • imap - 2007a1-1 - University of Washington IMAP package
  • imap-libs - 2007a1-1 - University of Washington IMAP package
  • inadyn - 1.97.4-1 - INADYN is a dynamic DNS client. That is, it maintains the IP address of a host name. It periodically checks whether the IP addr
  • indent - 2.2.10-1 - A program to make code easier to read, can also be used for C coding style conversion.
  • inetutils - 1.5-6 - A set of common daemons and clients found on commercial UNIX systems.
  • inferno-small - 4.hg20091119-1 - Inferno is an operating system for creating and supporting distributed services, it can either run natively or be hosted under
  • inferno-utils - 4.hg20091119-1 - Inferno is an operating system for creating and supporting distributed services, it can either run natively or be hosted under
  • ink - 0.5.0-1 - Ink is a command line tool for checking the ink level of your locally connected printer.
  • iotop - 0.4-1 - Iotop is a top-like UI used to show the I/O behaviour of processes.
  • ipac-ng - 1.31-3 - iptables/ipchains based IP accounting package for Linux.
  • ipcalc - 0.41-1 - Calculator for IPv4 addresses.
  • iperf - 2.0.4-1 - A tool for measuring TCP and UDP bandwidth performance.
  • ipkg-opt - 0.99.163-10 - The Itsy Package Manager
  • ipkg-web - 7-7 - A web frontend for ipkg
  • iptables - 1.4.10-1 - Userland utilities for controlling firewalling rules
  • iputils-arping - 20070202-1 - The arping command acts like the standard ping command except it pings a machine by its ARP address instead of its IP address.
  • ipython-common - 0.10.2-1 - An enhanced interactive Python shell
  • ircd-hybrid - 7.2.2-1 - IRCD Hybrid
  • irssi - 0.8.14-1 - A terminal based IRC client for UNIX systems.
  • irssi-dev - 0.8.14-1 - irssi dev files
  • ivorbis-tools - 1.0-7 - Tools to allow you to play, encode, and manage Ogg Vorbis files. This version is hacked to use the Tremor integer decoder.
  • jamvm - 1.5.1-1 - VM spec version 2 conformant. Extremely small with stripped executable
  • jed - 0.99.19-1 - A powerful yet friendly text editor.
  • jfsutils - 1.1.15-1 - Linux Filesystem Utilities for IBMs JFS
  • jikes - 1.22-1 - IBM java compiler
  • joe - 3.6-1 - Joe's own editor. A text editor with wordstar-like and emacs-like keybindings.
  • jove - 4.16.0.70-2 - A tiny, fast editor with emacs keybindings
  • keychain - 2.7.1-1 - Key manager for OpenSSH.
  • kismet - 2007-01-R1b-4 - An 802.11 layer2 wireless network detector, sniffer, and intrusion detection system.
  • kissdx - 0.13-10a-3 - kissdx is a PC-Link clone for KiSS media players with added features for DVD, video and picture playback.
  • knock - 0.5-5 - knockd is a port-knock server. It listens to all traffic on an ethernet (or PPP) interface, looking for special knock sequences
  • lame - 3.98.4-1 - LAME is an LGPL MP3 encoder.
  • lcd4linux - 0.10.0+r758-1 - Grabs information from the kernel and some subsystems and displays it on an external liquid crystal display
  • leafnode - 1.11.7-1 - Leafnode is a caching Usenet news proxy that enables online newsreaders to read news off-line. It is designed for zero (full-au
  • less - 443-1 - Less file browser
  • lftp - 4.3.0-1 - Sophisticated ftp/http client, file transfer program supporting a number of network protocols.
  • lha - 114i-1 - lha - File archiving utility with compression
  • liba52 - 0.7.4-1 - a free ATSC A/52 stream decoder.
  • libao - 0.8.8-1 - Cross Platform Audio Library.
  • libart - 2.3.17-2 - 2-d graphics library.
  • libassuan - 2.0.1-1 - Libassuan is the IPC library used by some GnuPG related software.
  • libbt - 1.05-5 - a C library implementing the core BitTorrent protocol
  • libcapi20 - 3.0.5-cm-2 - This Library supports remote capi over an TCP/IP network.
  • libcdio - 0.78.2-1 - The Compact Disc Input and Control library (libcdio) contains a library for CD-ROM and CD image access.
  • libcurl - 7.21.7-1 - Curl is a command line tool for transferring files with URL syntax, supporting FTP, FTPS, HTTP, HTTPS, GOPHER, TELNET, DICT, FI
  • libcurl-dev - 7.21.7-1 - Development files for libcurl
  • libdaemon - 0.14-1 - A lightweight C library that eases the writing of UNIX daemons.
  • libdb - 4.2.52-3 - Berkeley DB Libraries
  • libdlna - 0.2.3-2 - Reference DLNA (Digital Living Network Alliance) open-source implementation for Linux.
  • libdvbpsi - 0.1.5-1 - A simple library designed for decoding and generation of MPEG TS and DVB PSI tables.
  • libdvdnav - 0.1.10-1 - dvdnav
  • libdvdread - 0.9.7-2 - library for reading dvd
  • libebml - 1.0.0-1 - Extensible Binary Meta Language access library
  • libesmtp - 1.0.6-1 - libESMTP is a library to manage posting electronic mail using SMTP to a preconfigured Mail Transport Agent (MTA).
  • libevent - 2.0.11-1 - libevent to implement an event loop
  • libexif - 0.6.19-1 - Library to parse EXIF info in JPEG file and read/write the data from those tags.
  • libexosip2 - 3.3.0-1 - The eXtended osip library.
  • libextractor - 0.5.23-1 - Library to extract meta-data from files of arbitrary type.
  • libftdi - 0.7-2 - Library to access the FTDI (usb2serial) chip in userspace via libusb
  • libgc - 6.8-1 - The Boehm-Demers-Weiser conservative garbage collector can be used as a garbage collecting replacement for C malloc or C++ new.
  • libgcrypt - 1.5.0-1 - GNU cryptography libray, needed by gnutls
  • libgd - 2.0.35-6 - An ANSI C library for the dynamic creation of images
  • libghttp - 1.0.9-1 - libghttp is a light-weight http fetching library.
  • libgmp - 4.3.2-1 - GNU Multiple Precision Arithmetic Library.
  • libgpg-error - 1.10-1 - Error handling library for libgcrypt
  • libgphoto2 - 2.4.1-1 - digital camera software libraries
  • libgsasl - 1.6.1-1 - GNU SASL command line utility.
  • libhid - 0.2.16-2 - libhid provides a generic and flexible way to access and interact with USB HID devices
  • libid3tag - 0.15.1b-1 - The library used for ID3 tag reading
  • libidn - 1.21-1 - GNU Libidn is an implementation of the Stringprep, Punycode and IDNA specifications defined by the IETF Internationalized Domai
  • libieee1284 - 0.2.11-1 - libieee1284 is a cross-platform library for parallel port access.
  • libijs - 0.35-1 - IJS raster image transport protocol
  • libinklevel - 0.8.0-1 - A library for checking the ink level of your printer.
  • libjpeg - 6b-3 - collection of jpeg tools
  • libksba - 1.0.3-1 - Libksba is a CMS and X.509 access library.
  • liblcms - 1.19-1 - A small-footprint, speed optimized color management engine.
  • liblzma0 - 5.0.3-1 - A free general-purpose data compression software with high compression ratio
  • libmaa - 1.2.0-1 - The LIBMAA library provides many low-level data structures which are helpful for writing compilers, including hash tables, sets
  • libmad - 0.15.1b-4 - MPEG Audio Decoder library
  • libmatroska - 1.0.0-1 - lib to access Matroska (an extensible open standard Audio/Video container format)
  • libmemcache - 1.4.0.rc2-4 - The C API for memcached.
  • libmms - 0.5-1 - A common library for parsing mms:// and mmsh:// type network streams
  • libmpcdec - 1.2.6-1 - Portable Musepack decoder library.
  • libmpdclient - 2.1-1 - A stable, documented, asynchronous API library for interfacing MPD in the C, C++ & Objective C languages
  • libmpeg2 - 0.4.1-2 - A free library for decoding MPEG-2 and MPEG-1 video streams.
  • libmrss - 0.19.2-1 - A C library for parsing, writing and creating RSS (0.91, 0.92, 1.0, 2.0) files or streams.
  • libmtp - 0.1.4-1 - Implementation of the Media Transfer Protocol (MTP).
  • libnetfilter-queue - 0.0.11-1 - API to packets that have been queued by the kernel packet filter.
  • libnfnetlink - 0.0.14-1 - Low-level library for netfilter related kernel/userspace communication.
  • libnsl - 0.9.28-4 - Network Services Library
  • libnxml - 0.18.3-1 - nXML is a C library for parsing, writing and creating XML 1.0 and 1.1 files or streams. It supports utf-8, utf-16be and utf-16l
  • libogg - 1.2.1-1 - Ogg is a multimedia container format.
  • libol - 0.3.16-3 - Support library for syslog-ng
  • libopensync - 0.22-1 - A synchronization engine.
  • libosip2 - 3.3.0-2 - oSIP library is an implementation of SIP - rfc3261
  • libotr - 3.2.0-1 - Off-the-Record (OTR) Messaging.
  • libpar2 - 0.2-5 - A library for performing common tasks related to PAR recovery sets
  • libpcap - 1.0.0-2 - PCAP Library
  • libpcap-dev - 1.0.0-2 - PCAP Library header files for development
  • libpng - 1.2.44-1 - Portable Network Graphics Libraries
  • libpth - 2.0.7-2 - Pth is a very portable POSIX/ANSI-C based library for Unix platforms which provides non-preemptive priority-based scheduling fo
  • librsync - 0.9.7-1 - librsync is a free software library that implements the rsync remote-delta algorithm.
  • libsamplerate - 0.1.6-1 - Secret Rabbit Code (aka libsamplerate) is a Sample Rate Converter for audio.
  • libshout - 2.2.2-2 - Library which can be used to write a source client like ices.
  • libsigc++ - 2.2.3-1 - libsigc++ implements a typesafe callback system for standard C++.
  • libsndfile - 1.0.24-1 - A C library for reading and writing files containing sampled sound (such as MS Windows WAV and the Apple/SGI AIFF format) throu
  • libsoup - 2.2.96-1 - The libsoup package contains an HTTP library implementation in C.
  • libtasn1 - 2.9-1 - ASN.1 structure parser library.
  • libtheora - 1.1.0-1 - A free and open video compression format from the Xiph.org Foundation.
  • libtiff - 3.9.5-1 - Tag Image File Format Libraries
  • libtool - 1.5.26-1 - Library tools.
  • libtorrent - 0.12.6-1 - libtorrent is a BitTorrent library with a focus on high performance and good code.
  • libuclibc++ - 0.2.2-9 - C++ standard library designed for use in embedded systems
  • libupnp - 1.6.6-1 - The Universal Plug and Play (UPnP) SDK for Linux provides support for building UPnP-compliant control points, devices, and brid
  • libusb - 0.1.12-2 - Library for interfacing to the USB subsystem.
  • libvncserver - 0.9.1-2 - LibVNCServer is a library that makes it easy to make a VNC server.
  • libvorbis - 1.3.2-1 - Ogg Vorbis compressed audio format.
  • libvorbisidec - cvs-20050221-2 - libvorbisidec is the integer-only ogg decoder library, AKA Tremor
  • libxml2 - 2.7.8-1 - Libxml2 is the XML C parser and toolkit developed for the Gnome project.
  • libxslt - 1.1.26-2 - An XML Stylesheet processor based on libxml2
  • lighttpd - 1.4.29-1 - A fast webserver with minimal memory footprint.
  • links2 - 2.2-1 - Links is a web browser that can run in text mode.
  • linksys-tftp - 1.2.1-1 - TFTP Client customized for a non-standard tftp authentication process.
  • linphone - 3.3.2-1 - Open source SIP VOIP phone.
  • lirc - 0.8.1-3 - Linux Infrared Remote Control (tira)
  • littlesmalltalk - 5.0a08+svn0086-1 - A minimalistic implementation of the Smalltalk programming language. Originally developed by Timothy A. Budd.
  • llink - 2.2.2-1 - A media streamer using the HTTP protocol and should work with most Syabas middleware hardware.
  • llink-dev - 2.2.2-1 - llink development files
  • logrotate - 3.7.5-2 - Rotates, compresses, removes and mails system log files.
  • lookat - 1.4.1-1 - lookat (or bekijk in the Dutch version) is a program to view Un*x text files and manual pages.
  • loudmouth - 1.4.3-1 - Loudmouth is a lightweight and easy-to-use C library for programming with the Jabber protocol.
  • lrzsz - 0.12.20-1 - Tools for zmodem/xmodem/ymodem file transfer
  • lsof - 4.82-1 - LiSt Open Files - a diagnostic tool.
  • ltrace - 0.5.3-1 - Tracks runtime library calls in dynamically linked programs.
  • lua - 5.1.4-3 - Lua is a powerful light-weight programming language designed for extending applications.
  • luarocks - 2.0.4.1-1 - LuaRocks is a deployment and management system for Lua modules.
  • lynx - 2.8.6-1 - A text browser for the World Wide Web
  • lzo - 2.03-1 - Compression library
  • m4 - 1.4.13-1 - gnu macro processor and compiler front end
  • madplay - 0.15.2b-3 - MPEG Audio Decoder player
  • mailman - 2.1.11-1 - the GNU Mailing List Manager.
  • make - 3.82-1 - examines files and runs commands necessary for compilation
  • man - 1.6f-1 - unix manual page reader
  • man-pages - 2.76-1 - unix manual pages
  • mc - 4.7.5.1-1 - Midnight Commander File Manager
  • mcabber - 0.10.1-1 - A small Jabber console client.
  • md5deep - 3.9.1-1 - md5deep is a cross-platform set of programs to compute MD5, SHA-1, SHA-256 Tiger, or Whirlpool message digests on an arbitrary
  • mdadm - 2.6-1 - A software raid configuration utility.
  • mediatomb - 0.11.0-5 - UPnP AV Mediaserver for Linux.
  • mediawiki - 1.4.0-2 - A fast, full-featured, wiki based on php.
  • memcached - 1.3.0-2 - memcached is a high-performance, distributed memory object caching system.
  • memtester - 4.0.6-1 - A runtime memtest utility
  • metalog - 0.7-6 - Modern, highly configurable syslogd replacement
  • mg - 20090107-1 - mg is a Public Domain EMACS style editor.
  • miau - 0.6.4-2 - The MIAU IRC Bouncer (Proxy)
  • microcom - 102-1 - A minicom-like serial terminal emulator with scripting support.
  • microdc2 - 0.15.6-3 - A command-line based Direct Connect client.
  • microperl - 5.8.8-11 - Microperl.
  • mimms - 0.0.9-2 - MiMMS is a program designed to allow you to download streams using the MMS protocol and save them to your computer, as opposed
  • mini-sendmail - 1.3.6-1 - small sendmail-compatible mail forwarder
  • mini-snmpd - 1.0-1 - SNMP server for embedded systems
  • minicom - 2.5-1 - Minicom is a serial communication program. It is a Unix clone of the well-known MS-DOS Telix program. It has ANSI color, a dial
  • minihttpd - 1.19-2 - small HTTP server
  • miniupnpd - 1.4.20100921-1 - A lightweight uPNP and NAT-PMP daemon
  • miscfiles - 1.4.2-1 - Collection of various files.
  • mktemp - 1.7-1 - Mktemp is a small program to allow safe temporary file creation from shell scripts.
  • mlocate - 0.15-1 - A merginging locate program to find files fast
  • moblock - 0.8-1 - Blocks connections from/to hosts listed in a file in peerguardian format.
  • moc - 2.4.3-1 - MOC (music on console) is a console audio player with a simple ncurses interface in playmp3list style.
  • mod-fastcgi - 2.4.2-3 - mod_fastcgi is an Apache module providing language independent, scalable, open extension to CGI.
  • mod-python - 3.3.1-2 - Mod_python is an Apache server module that integrates with the Python language.
  • mod-wsgi - 3.3-1 - An Apache module that provides a WSGI compliant interface for hosting Python based web applications within Apache.
  • modutils - 2.4.27-2 - Linux module utilities These utilities are intended to make a Linux modular 2.2 or 2.4 kernel manageable for all users, adminis
  • monit - 5.2.5-1 - monit is a utility for managing and monitoring, processes, files, directories and devices on a UNIX system. monit conducts auto
  • most - 4.10.2-1 - MOST is a powerful paging program supporting multiple windows and can scroll left and right. Why settle for less?
  • motion - 3.2.12-1 - a software motion detector
  • mp3blaster - 3.2.3-2 - interactive text-based program that plays MP3, Ogg Vorbis, wav, and sid audio files
  • mp3info - 0.8.5a-1 - A little utility used to read and modify the ID3 tags of MP3 files.
  • mpack - 1.6-3 - Tools for encoding/decoding MIME messages.
  • mpage - 2.5.5-1 - Print several pages on a single sheet of paper.
  • mpc - 0.19-1 - A command line tool to interface MPD.
  • mpd - 0.15.15-2 - Music Player Daemon (MPD) allows remote access for playing music.
  • mpdscribble - 0.19-1 - Last.fm reporting client for mpd.
  • mpeg2dec - 0.4.1-2 - A simple decoder and demultiplexer for MPEG-1 and MPEG-2 streams to test libmpeg2.
  • mpg123 - 1.13.3-1 - Fast console MPEG Audio Player.
  • mpop - 1.0.24-1 - mpop is an SMTP client.
  • mrtg - 2.17.2-1 - Multi Router Traffic Grapher
  • msmtp - 1.4.24-1 - msmtp is an SMTP client.
  • msort - 8.53-1 - Msort sorts files in sophisticated ways.
  • msynctool - 0.22-1 - CLI for opensync.
  • mt-daapd - 0.2.4.2-1 - A multi-threaded DAAP server for Linux and other POSIX type systems. Allows a Linux box to share audio files with iTunes users
  • mt-daapd-svn - 1696-1 - A multi-threaded DAAP server for Linux and other POSIX type systems. Allows a Linux box to share audio files with iTunes users
  • mtools - 4.0.10-1 - A collection of utilities to access MS-DOS disks from Unix without mounting them.
  • multitail - 5.2.7-1 - MultiTail follows files in style, it is tail on steroids.
  • mutt - 1.5.17-1 - text mode mail client
  • mxml - 2.5-1 - Mini-XML is a small XML parsing library that you can use to read XML and XML-like data files in your application without requir
  • myrapbook - 0.1b-1 - A daemon originally written for WD My Book World disk drives, that implements a downloader for rapidshare.com premium users. Is
  • mysql - 4.1.22-3 - Popular free SQL database system
  • mysql-connector-odbc - 3.51.12-2 - MySQL connector ODBC
  • mysql5 - 5.0.88-1 - Popular free SQL database system
  • nagg - 0.9.9-1 - Not Another Gallery Generator
  • nagios-plugins - 1.4.2-4 - The nagios (network monitor system) plugins
  • nail - 11.25-1 - command-line email-client supporting POP3, IMAP, SMTP, ...
  • nano - 2.2.6-1 - A pico like editor
  • nanoblogger - 3.4.2-1 - A small weblog engine written in Bash for the command line.
  • nbench-byte - 2.2.2-1 - BYTE's Native Mode Benchmarks
  • ncdu - 1.7-1 - NCurses Disk Usage.
  • ncftp - 3.2.4-1 - Nice command line FTP client
  • ncmpc - 0.16.1-1 - A curses client for the Music Player Daemon (MPD).
  • ncurses - 5.7-1 - NCurses libraries
  • ncurses-dev - 5.7-1 - NCurses libraries, header files
  • ncursesw - 5.7-1 - NCurses libraries with wide char support
  • ncursesw-dev - 5.7-1 - NCurses libraries with wide char support, header files
  • nd - 1.0-1 - Simple network daemon.
  • ne - 2.2-1 - The nice editor.
  • nemesis - 1.4-1 - A command-line network packet crafting and injection utility.
  • neon - 0.29.3-1 - an HTTP and WebDAV client library, with a C interface
  • net-snmp - 5.4.2.1-1 - net-SNMP is a suite of applications used to implement SNMP v1, SNMP v2c and SNMP v3 using both IPv4 and IPv6
  • net-tools - 1.60-6 - Network Config and Debug tools (route, arp, netstat etc.)
  • netatalk - 2.0.5-2 - Apple talk networking daemon.
  • netcat - 1.10pl32-5 - TCP/IP swiss army knife.
  • nethack - 3.4.3-3 - The best text based RPG of all time.
  • netio - 123-3 - A program to test network throughput
  • netrik - 1.16.1-1 - Netrik is an advanced text mode WWW browser.
  • newt - 0.52.7-1 - Not Eriks Windowing Toolkit - text mode windowing with slang.
  • nginx - 0.8.54-1 - A high perfomance http and reverse proxy server, and IMAP/POP3 proxy server.
  • ngrep - 1.45-4 - network grep.
  • nickle - 2.69-1 - Nickle, a powerful desktop calculator language. Nickle supports many features of advanced languages, as well as arbitrary preci
  • ninvaders - 0.1.1-1 - They are approaching as we speak.
  • nload - 0.7.2-2 - Nload is a console application which monitors network traffic and bandwidth usage in real time
  • nmap - 5.35DC1-1 - Nmap is a feature-rich portscanner
  • noip - 2.1.9-1 - www.no-ip.com Dynamic Update Client
  • nostromo - 1.9-1 - nhttpd is a simple, fast and secure HTTP server.
  • nrpe - 2.6-1 - The Nagios Remote Plugin Executor
  • ntfs-3g - 2009.4.4-1 - ntfs-3g - Third Generation Read/Write NTFS Driver.
  • ntfsprogs - 1.13.1-1 - NTFS filesystem libraries and utilities
  • ntop - 3.3-6 - Network monitoring software
  • ntp - 4.2.6.2-2 - A time synchronization daemon
  • ntpclient - 2007_365-1 - Using RFC1305 (NTP), retrieves a remote date and time
  • nttcp - 1.47-1 - Network performance testing tool
  • nut - 2.4.1-1 - Network UPS tools.
  • nvi - 1.79-2 - The original Berkeley Vi.
  • nylon - 1.21-4 - Nylon is a small socks4/socks5 proxy server
  • nzbget - 0.7.0-1 - A command-line client/server based binary newsgrabber for nzb-files (latest stable version).
  • nzbget-testing - 0.8.0-r394-1 - A command-line client/server based binary newsgrabber for nzb-files (latest testing version).
  • obexftp - 0.22-1 - Transfer files to/from any OBEX enabled device (most likely mobiles).
  • ocaml - 3.12.0-1 - Objective Caml system is the main implementation of the Caml language.
  • oleo - 1.99.16-2 - GNU Oleo is a lightweight spreadsheet application.
  • open2300 - 1.10-1 - Open2300 is a package of software tools that reads (and writes) data from a Lacrosse WS2300/WS2305/WS2310/WS2315 Weather Statio
  • opendchub - 0.7.15-1 - Open DC hub is a Unix/Linux version of the hub software for the Direct Connect network.
  • openjpeg - 1.3-1 - The OpenJPEG library is an open-source JPEG 2000 codec.
  • openldap - 2.3.43-2 - Open Lightweight Directory Access Protocol
  • openldap-libs - 2.3.43-2 - Open Lightweight Directory Access Protocol
  • openobex - 1.3-1 - Free open source implementation of the Object Exchange (OBEX) protocol.
  • openser - 1.3.4-1 - OpenSIP Express Router
  • openssh - 5.8p2-1 - a FREE version of the SSH protocol suite of network connectivity tools.
  • openssh-sftp-server - 5.8p2-1 - sftp-server only from a FREE version of the SSH protocol suite of network connectivity tools.
  • openssl - 0.9.7m-5 - Openssl provides the ssl implementation in libraries libcrypto and libssl, and is needed by many other applications and librari
  • openssl-dev - 0.9.7m-5 - openssl native development files
  • openvpn - 2.2.0-1 - SSL based VPN server with Windows client support
  • optware-devel - 6.8-10 - This is a meta package that bundles all the packages required for optware native development. When fully functional, it should
  • ossp-js - 1.6.20070208-1 - a stand-alone distribution of the JavaScript (JS) programming language reference implementation from Mozilla.
  • oww - 0.83.2-1 - Oww reads from a DalSemi/AAG weather station.
  • p7zip - 9.20.1-1 - Command line version of 7-zip for POSIX systems.
  • p910nd - 0.95-1 - A small printer daemon intended that does not spool to disk but passes the job directly to the printer.
  • pal - 0.3.4-2 - pal is a command-line calendar program that can keep track of events.
  • palantir - 2.6-2 - Multichannel interactive streaming solution
  • par2cmdline - 0.4-4 - tool to apply the data-recovery capability concepts of RAID-like systems to the posting & recovery of multi-part archives on Us
  • parted - 1.7.1-1 - GNU partition editor
  • patch - 2.6.1-1 - applies a diff to produce a patched file
  • patchutils - 0.3.1-1 - Patchutils is a small collection of programs that operate on patch files.
  • pcal - 4.11.0-1 - Calendar-generation programs which produce nice-looking PostScript output.
  • pcapsipdump - 0.1.2-3 - tool for dumping SIP sessions (+RTP traffic, if available)
  • pciutils - 3.0.0-1 - Linux PCI Utilities, various utilities for inspecting and setting of devices connected to the PCI bus.
  • pcre - 8.12-1 - Perl-compatible regular expression library
  • pcre-dev - 8.12-1 - Perl-compatible regular expression library, files for development
  • pen - 0.18.0-1 - A load balancer for simple tcp based protocols such as http or smtp.
  • perl - 5.8.8-23 - Practical Extraction and Report Language.
  • perl-algorithm-diff - 1.1901-2 - Algorithm-Diff - Compute *intelligent* differences between two files / lists.
  • perl-appconfig - 1.56-3 - Perl5 module for reading configuration files and parsing command line arguments.
  • perl-archive-tar - 1.38-1 - Archive-Tar - The Perl Database Interface by Tim Bunce.
  • perl-archive-zip - 1.16-3 - Archive-Zip - Provide an interface to ZIP archive files.
  • perl-assp - 1.2.6-1 - Anti-Spam SMTP Proxy Server
  • perl-b-keywords - 1.08-1 - Lists of reserved barewords and symbol names.
  • perl-berkeleydb - 0.32-1 - BerkeleyDB - Perl extension for Berkeley DB version 2, 3 or 4
  • perl-bit-vector - 6.4-1 - This package implements bit vectors of arbitrary size and provides efficient methods for handling them.
  • perl-bsd-resource - 1.28-1 - BSD process resource limit and priority functions.
  • perl-business-isbn - 1.84-1 - Business-ISBN - work with International Standard Book Numbers
  • perl-business-isbn-data - 1.17-1 - Business-ISBN-Data - <module_description>
  • perl-carp-clan - 5.3-1 - This module reports errors from the perspective of the caller of a clan of modules, similar to Carp.pm itself.
  • perl-cgi - 3.42-1 - Perl module for CGI.
  • perl-cgi-application - 3.31-2 - Framework for building reusable web-applications
  • perl-class-accessor - 0.30-2 - Class::Accessor - Automated accessor generation
  • perl-class-data-inheritable - 0.04-2 - Class-Data-Inheritable - Inheritable, overridable class data
  • perl-class-dbi - v3.0.15-1 - Class-DBI - Simple Database Abstraction.
  • perl-class-trigger - 0.10-2 - Class-Trigger - Mixin to add / call inheritable triggers.
  • perl-clone - 0.29-1 - Clone - recursively copy Perl datatypes.
  • perl-compress-zlib - 1.42-3 - Compress-Zlib - Interface to zlib compression library.
  • perl-convert-binhex - 1.119-1 - Convert-BinHex - extract data from Macintosh BinHex files
  • perl-convert-tnef - 0.17-2 - Convert-TNEF - Perl module to read TNEF files
  • perl-convert-uulib - 1.08-1 - Convert-UUlib - Perl interface to the uulib library (a.k.a. uudeview/uuenview).
  • perl-crypt-openssl-random - 0.03-1 - Crypt-OpenSSL-Random - Routines for accessing the OpenSSL pseudo-random number generator
  • perl-crypt-openssl-rsa - 0.24-1 - Crypt-OpenSSL-RSA - RSA encoding and decoding, using the openSSL libraries
  • perl-crypt-ssleay - 0.55-1 - OpenSSL glue that provides LWP https support.
  • perl-danga-socket - 1.44-1 - Event loop and event-driven async socket base class.
  • perl-date-calc - 5.4-2 - Gregorian calendar date calculations.
  • perl-date-manip - 5.48-1 - date manipulation routines
  • perl-db-file - 1.814-2 - A module which allows Perl programs to make use of the facilities provided by Berkeley DB version 1.
  • perl-dbd-mysql - 4.006-1 - DBD-mysql - The Perl Database Driver for MySQL.
  • perl-dbd-sqlite - 1.14-1 - The Perl Database Driver for SQLITE.
  • perl-dbi - 1.607-1 - DBI - The Perl Database Interface by Tim Bunce.
  • perl-dbix-contextualfetch - 1.03-2 - DBIx-ContextualFetch - Add contextual fetches to DBI.
  • perl-devel-caller - 0.11-1 - meatier versions of caller.
  • perl-devel-lexalias - 0.04-1 - alias lexical variables.
  • perl-device-serialport - 1.04-1 - Device::SerialPort for serial port users.
  • perl-digest-hmac - 1.01-4 - The module allows you to use the NIST SHA-1 message digest algorithm.
  • perl-digest-perl-md5 - 1.8-1 - Digest-Perl-MD5 - Perl implementation of Ron Rivests MD5 Algorithm
  • perl-digest-sha - 5.47-1 - Digest-SHA - Perl extension for SHA-1/224/256/384/512.
  • perl-digest-sha1 - 2.11-3 - The module allows you to use the NIST SHA-1 message digest algorithm.
  • perl-email-address - 1.889-1 - RFC 2822 Address Parsing and Creation.
  • perl-email-messageid - 1.401-1 - Generate world unique message-ids.
  • perl-email-mime - 1.863-3 - Easy MIME message parsing.
  • perl-email-mime-contenttype - 1.015-1 - Parse a MIME Content-Type Header.
  • perl-email-mime-encodings - 1.312-1 - A unified interface to MIME encodings and decoding.
  • perl-email-mime-modifier - 1.443-2 - Modify Email::MIME Objects Easily
  • perl-email-send - 2.194-2 - Simply Sending Email.
  • perl-email-simple - 2.005-1 - simple parsing of RFC2822 message format and headers.
  • perl-encode-detect - 1.00-1 - Detects the encoding of data.
  • perl-extutils-cbuilder - 0.18-2 - ExtUtils-CBuilder - Compile and link C code for Perl modules.
  • perl-extutils-parsexs - 2.19-1 - ExtUtils-ParseXS - converts Perl XS code into C code.
  • perl-file-next - 1.02-1 - File::Next is a lightweight, taint-safe file-finding module. It is lightweight and has no non-core prerequisites.
  • perl-file-rename - 0.05-1 - renames multiple files.
  • perl-gd - 2.35-2 - GD - Interface to Gd Graphics Library
  • perl-gd-barcode - 1.15-2 - GD-Barcode - Create barcode image with GD
  • perl-hottproxy - 0.24.0.0-1 - HTTP proxy targeted specifically toward serving the needs of wireless Internet devices (cell phones, PDAs, etc.).
  • perl-html-parser - 3.60-1 - A collection of modules that parse and extract information from HTML documents.
  • perl-html-tagset - 3.04-4 - This module contains data tables useful in dealing with HTML.
  • perl-html-template - 2.8-2 - Perl module to use HTML Templates from CGI scripts
  • perl-http-response-encoding - 0.05-1 - Adds encoding() to HTTP::Response.
  • perl-ima-dbi - 0.34-2 - Ima-DBI - Database connection caching and organization.
  • perl-io-multiplex - 1.09-1 - IO-Multiplex - Manage IO on many file handles
  • perl-io-socket-ssl - 0.999-1 - IO-Socket-SSL - Nearly transparent SSL encapsulation for IO::Socket::INET
  • perl-io-string - 1.08-2 - IO-String - Emulate file interface for in-core strings.
  • perl-io-stringy - 2.110-2 - IO-stringy - I/O on in-core objects like strings and arrays
  • perl-io-zlib - 1.09-1 - IO-Zlib - IO:: style interface to Compress::Zlib.
  • perl-ip-country - 2.21-1 - IP-Country - fast lookup of country codes by IP address
  • perl-json-xs - 1.5-1 - JSON serialising/deserialising, done correctly and fast.
  • perl-lexical-persistence - 0.97-1 - Persistent lexical variable values for arbitrary calls.
  • perl-libnet - 1.22-1 - A collection of Perl modules providing simple and consistent programming API to the client side of various internet protocols.
  • perl-libwww - 5.825-1 - libwww-perl - The World-Wide Web library for Perl
  • perl-libxml - 0.08-1 - Collection of Perl modules for working with XML
  • perl-mail-spf-query - 1.999.1-1 - Mail-SPF-Query - query Sender Policy Framework for an IP,email,helo
  • perl-mailtools - 1.77-1 - MailTools - Base class for manipulation of mail header fields
  • perl-mime-tools - 5.420-1 - MIME-tools - modules for parsing (and creating!) MIME entities
  • perl-module-build - 0.2808-1 - Module-Build - Build and install Perl modules.
  • perl-module-pluggable - 3.8-1 - Automatically give your module the ability to have plugins.
  • perl-module-refresh - 0.13-1 - Refresh %INC files when updated on disk.
  • perl-module-signature - 0.54-2 - Module-Signature - Module signature file manipulation.
  • perl-net-cidr-lite - 0.20-1 - Net-CIDR-Lite - Perl extension for merging IPv4 or IPv6 CIDR addresses
  • perl-net-dns - 0.48-4 - Perl DNS Resolver Module.
  • perl-net-ident - 1.20-4 - Net::Ident
  • perl-net-server - 0.97-1 - Net-Server - Extensible, general Perl server engine
  • perl-net-ssleay - 1.30-1 - Net_SSLeay - Perl extension for using OpenSSL
  • perl-padwalker - 1.5-1 - play with other peoples lexical variables
  • perl-par-dist - 0.21-2 - PAR-Dist - Create and manipulate PAR distributions.
  • perl-pod-readme - 0.081-2 - Pod-Readme - Convert POD to README file.
  • perl-poe-xs-queue-array - 0.005-1 - an XS implementation of POE::Queue::Array.
  • perl-return-value - 1.302-1 - Polymorphic Return Values
  • perl-scgi - 0.6-1 - The Perl SCGI server library.
  • perl-storable - 2.18-1 - The Storable extension brings persistency to your data.
  • perl-sys-hostname-long - 1.4-1 - Sys-Hostname-Long - Try every conceivable way to get full hostname
  • perl-sys-syscall - 0.22-1 - Access system calls that Perl does not normally provide access to.
  • perl-template-toolkit - 2.19-1 - The Template Toolkit is a fast, powerful and extensible template processing system. (www.template-toolkit.org)
  • perl-term-readkey - 2.30-2 - A perl module for simple terminal control
  • perl-term-readline-gnu - 1.16-1 - Perl extension for the GNU Readline/History Library.
  • perl-text-diff - 0.35-2 - Text-Diff - Perform diffs on files and record sets.
  • perl-timedate - 1.16-1 - A date and time module for perl.
  • perl-unicode-map - 0.112-3 - Unicode-Map - maps charsets from and to utf16 unicode
  • perl-unicode-string - 2.09-1 - Unicode-String - String of Unicode characters (UTF-16BE)
  • perl-universal-moniker - 0.08-2 - UNIVERSAL-moniker - This module will add a moniker (and plural_moniker) method to UNIVERSAL, and so to every class or module.
  • perl-unix-syslog - 0.100-1 - Unix-Syslog - Perl interface to the UNIX syslog(3) calls
  • perl-uri - 1.35-3 - URI - <module_description>
  • perl-version - 0.74-1 - version - Perl extension for Version Objects.
  • perl-wakeonlan - 0.41-1 - A Perl script that sends 'magic packets' to wake-on-LAN enabled ethernet adapters and motherboards, in order to switch on remot
  • perl-www-mechanize - 1.54-2 - Handy web browsing in a Perl object.
  • perl-xml-dom - 1.44-1 - A perl module for building DOM Level 1 compliant document structures
  • perl-xml-parser - 2.34-1 - A perl module for parsing XML documents.
  • perl-xml-regexp - 0.03-1 - Regular expressions for XML tokens
  • perl-yaml-syck - 1.05-1 - Fast, lightweight YAML loader and dumper.
  • perlbal - 1.78-1 - Reverse-proxy load balancer and webserver.
  • perlconsole - 0.4-2 - Perl Console is a small program that implements a Read-eval-print loop: it lets you evaluate Perl code interactively.
  • perltgd - 1.1.0-5 - Automated EPG updating for the Topfield range of PVRs
  • phoneme-advanced - 0.0.mr.2.b.34-1 - J2ME phoneme advanced, including CDC JVM.
  • php - 5.2.17-1 - The php scripting language
  • php-apache - 5.2.17-1 - The php scripting language, built as an apache module
  • php-curl - 5.2.17-1 - libcurl extension for php
  • php-dev - 5.2.17-1 - php native development environment
  • php-embed - 5.2.17-1 - php embedded library - the embed SAPI
  • php-fcgi - 5.2.17-1 - The php scripting language, built as an fcgi module
  • php-gd - 5.2.17-1 - libgd extension for php
  • php-imap - 5.2.17-1 - imap extension for php
  • php-ldap - 5.2.17-1 - ldap extension for php
  • php-mbstring - 5.2.17-1 - mbstring extension for php
  • php-mssql - 5.2.17-1 - mssql extension for php
  • php-mysql - 5.2.17-1 - mysql extension for php
  • php-odbc - 5.2.17-1 - odbc extension for php
  • php-pear - 5.2.17-1 - PHP Extension and Application Repository
  • php-pgsql - 5.2.17-1 - pgsql extension for php
  • php-thttpd - 2.25b-5.2.17-1 - php-thttpd is thttpd webserver with php support
  • php-xmlrpc - 5.2.17-1 - xmlrpc extension for php
  • phpmyadmin - 2.6.2-2 - Web-based administration interface for mysql
  • picocom - 1.6-1 - A minimal dumb-terminal emulation program.
  • picolisp - 2.2.6-1 - Describe picolisp here.
  • pinentry - 0.8.0-1 - A collection of simple PIN or passphrase entry dialogs
  • pixman - 0.15.14-1 - a library that provides low-level pixel manipulation features such as image compositing and trapezoid rasterization
  • pkgconfig - 0.15.0-2 - Package configuration tool
  • plowshare - 0.9.1-1 - A command-line downloader and uploader for some of the most popular file sharing websites
  • polipo - 1.0.4.1-1 - Polipo is a small and fast caching web proxy.
  • pop3proxy - 2.0.0-beta8-1 - A pop3 proxy server
  • popt - 1.16-1 - A C library for parsing command line parameters.
  • poptop - 1.2.1-1 - Poptop is the PPTP server solution for Linux.
  • portmap - 4-5 - Portmap daemon for NFS
  • postfix - 2.3.19-1 - The Postfix mail system is an alternative to sendmail.
  • postfix-doc - 2.3.19-1 - The Postfix mail system is an alternative to sendmail.
  • postgresql - 8.2.13-2 - PostgreSQL is a highly-scalable, SQL compliant, open source object-relational database management system
  • postgrey - 1.33-1 - a Postfix policy server implementing greylisting.
  • pound - 2.5-1 - Reverse-proxy and load-balancer.
  • powertop - 1.12-2 - PowerTOP is a Linux tool that helps you find programs that are consuming extra power when your computer is idle.
  • ppower - 0.1.5-1 - Ppower, short for 'Penguin Power', is a piece of software for controlling x10 home automation equipment connected to the comput
  • ppp - 2.4.3-1 - PPP is the Point-to-Point Protocol daemon.
  • privoxy - 3.0.16-1 - A Web proxy based on Internet Junkbuster.
  • procmail - 3.22-4 - Versatile email processor.
  • procps - 3.2.8-1 - PROCPS System Utilities
  • proftpd - 1.3.3e-1 - Highly configurable FTP server with SSL-TLS
  • proxytunnel - 1.9.0-1 - ProxyTunnel is a program that connects stdin and stdout to a server somewhere on the network, through a standard HTTPS proxy.
  • psmisc - 22.13-1 - A set of some small useful utilities that use the proc filesystem.
  • pssh - 2.2.2-1 - pssh provides parallel versions of openssh tools.
  • psutils - p17-1 - Describe psutils here.
  • puppy - 1.11-1 - Puppy will allow a user to communicate with a Topfield TF5000PVRt via a USB port.
  • pure-ftpd - 1.0.32-1 - A free (BSD), secure, production-quality and standard-conformant FTP server.
  • putmail - 1.4-1 - Putmail is a very lightweight MTA or SMTP client that may replace the sendmail command when used by MUAs that lack SMTP support
  • pv - 1.2.0-1 - Pipe Viewer - is a terminal-based tool for monitoring the progress of data through a pipeline.
  • pwgen - 2.06-1 - The pwgen program generates passwords which are designed to be easily memorized by humans, while being as secure as possible
  • py-apsw - 3.3.5-r1-2 - Another Python SQLite Wrapper.
  • py-bittorrent-common - 5.0.9-2 - BitTorrent is a scatter-gather network file transfer tool.
  • py-bluez - 0.9.2-1 - Python wrappers around bluez.
  • py-buildutils - 0.1.2-1 - buildutils provides several new commands for your package setup.py file to help make development easier.
  • py-cherrytemplate - 1.0.0-2 - CherryTemplate is an easy and powerful templating module for Python.
  • py-cjson - 1.0.5-1 - A very fast JSON encoder/decoder for Python.
  • py-codeville - 0.1.16-1 - a distributed version control system.
  • py-constraint - 1.1-3 - A Python module offering solvers for Constraint Solving Problems (CSPs) over finite domains in simple and pure Python.
  • py-constraint-doc - 1.1-3 - A Python module offering solvers for Constraint Solving Problems (CSPs) over finite domains in simple and pure Python.
  • py-crypto - 2.1.0-2 - Python Cryptography Toolkit.
  • py-curl-doc - 7.19.0-1 - PycURL is a Python interface to libcurl.
  • py-duplicity-doc - 0.6.13-1 - Encrypted bandwidth-efficient backup using the rsync algorithm
  • py-gd - 0.56-4 - GD module is an interface to the GD library.
  • py-gdchart2 - Beta1-4 - PyGDChart is a set of Python bindings for the GDChart library.
  • py-getmail-common - 4.20.4-1 - getmail is a mail retriever designed to allow you to get your mail from one or more mail accounts on various mail servers to yo
  • py-gnosis-utils - 1.2.1-1 - Gnosis Utilities contains a number of Python libraries, most (but not all) related to working with XML.
  • py-moin-common - 1.9.2-1 - MoinMoin is a nice and easy WikiEngine with advanced features, providing collaboration on easily editable web pages.
  • py-nevow-common - 0.9.33-1 - A web application construction kit written in Python.
  • py-pgsql - 2.5.1-2 - A Python DB-API 2.0 compliant interface to PostgreSQL databases.
  • py-pudge - 0.1.2-1 - A documentation generator for Python projects, using Restructured Text.
  • py-pyro - 3.5-1 - PYthon Remote Objects.
  • py-reportlab - 2.1-2 - An Open Source Python library for generating PDFs and graphics.
  • py-reportlab-common - 2.1-2 - An Open Source Python library for generating PDFs and graphics.
  • py-roundup-common - 1.4.16-1 - An issue-tracking system with command-line, web and e-mail interfaces.
  • py-selector - 0.8.11-1 - WSGI delegation based on URL path and method.
  • py-serial-common - 2.5-1 - Python module encapsulating the access to serial port.
  • py-silvercity - 0.9.7-1 - SilverCity is a lexing package, based on Scintilla, that can provide lexical analysis for over 20 programming and markup langau
  • py-simpy-doc - 2.0.1-1 - An object-oriented, process-based discrete-event simulation language based on standard Python.
  • py-soappy - 0.12.0-3 - A SOAP implementation for Python.
  • py-tgfastdata - 0.9a5-3 - An TurboGears extension that provides automatic user interface generation based upon an application model objects.
  • py-urwid-common - 0.9.9.1-1 - Urwid is a console user interface library in Python.
  • py-usb - 0.4.1-1 - PyUSB is a native Python module written in C that provides USB access for it.
  • py-weatherget-doc - 0.4.0.1-2 - A command line based weather reporting tool written in python.
  • py-wsgiref - 0.1.2-1 - Reference implementation of the python Web Server Gateway Interface specification.
  • py-xml - 0.8.4-4 - The PyXML package is a collection of libraries to process XML with Python.
  • py24-4suite - 1.0.2-2 - Python-based toolkit for XML and RDF application development.
  • py24-amara - 1.2.0.2-2 - A collection of Python/XML processing tools to complement 4Suite.
  • py24-celementtree - 1.0.5-20051216-5 - A toolkit that contains a number of light-weight components for working with XML (C implementation).
  • py24-cherrypy - 2.3.0-1 - A pythonic, object-oriented web development framework.
  • py24-clips - 1.0.7.348-1 - PyCLIPS is an extension module that embeds full CLIPS functionality in Python applications.
  • py24-curl - 7.18.2-1 - PycURL is a Python interface to libcurl.
  • py24-decoratortools - 1.7-2 - Class and function decoratortoolss.
  • py24-elementtree - 1.2.6-20050316-5 - A toolkit that contains a number of light-weight components for working with XML.
  • py24-feedparser - 4.1-1 - Parse RSS and Atom feeds in Python.
  • py24-flup - 1.0.2-1 - A collection of python WSGI modules including those speaking AJP 1.3, FastCGI and SCGI.
  • py24-formencode - 1.2.2-1 - A form generation and validation package for python.
  • py24-hellanzb - 0.13-2 - Hellanzb is a Python application designed for *nix environments that retrieves nzb files and fully processes them
  • py24-kid - 0.9.6-2 - Pythonic XML-based Templating
  • py24-mssql - 1.0.2-1 - Simple MSSQL Python extension module.
  • py24-mx-base - 3.1.3-1 - A collection of userful open source python packages from eGenix.com.
  • py24-pastedeploy - 1.3.3-1 - Load, configure, and compose WSGI applications and servers.
  • py24-pastescript - 1.7.3-2 - A pluggable command-line frontend, including commands to setup package file layouts.
  • py24-pastewebkit - 1.0-4 - A port/reimplementation of Webware WebKit in WSGI and Paste.
  • py24-pexpect - 2.4-1 - Python module for automating interactive applications.
  • py24-protocols - 1.0a0dev-r2082-5 - Python interface module.
  • py24-psycopg - 1.1.21-6 - psycopg is a PostgreSQL database adapter for the Python programming language.
  • py24-pygresql - 3.8.1-3 - Python module that interfaces to a PostgreSQL database.
  • py24-ruledispatch - 0.5a0.dev-r2303-2 - Python module for rule-based dispatching and generic functions.
  • py24-sabnzbd - 0.2.5-2 - A web-interface based binary newsgrabber written in python, with nzb file support.
  • py24-setuptools - 0.6c11-1 - Tool to build and distribute Python packages, enhancement to distutils.
  • py24-sqlite - 2.4.1-1 - pysqlite is an interface to the SQLite database server for Python. It aims to be fully compliant with Python database API versi
  • py24-turbocheetah - 1.0-2 - Python template plugin that supports use of Cheetah templates.
  • py24-turbojson - 1.2.1-1 - Python template plugin that supports JSON.
  • py24-yenc - 0.3-1 - A module that provides only raw yEnc encoding/decoding with builtin crc32 calculation (C implementation).
  • py24-zope-interface - 3.5.0-1 - A separate distribution of the zope.interface package used in Zope 3, along with the packages it depends on.
  • py25-4suite - 1.0.2-2 - Python-based toolkit for XML and RDF application development.
  • py25-amara - 1.2.0.2-2 - A collection of Python/XML processing tools to complement 4Suite.
  • py25-apsw - 3.3.5-r1-2 - Another Python SQLite Wrapper.
  • vpy25-axiom - 0.5.31-1 - An object database or object-relational mapper.
  • py25-beaker - 1.5.4-1 - A Session and Caching library with WSGI Middleware.
  • py25-bittorrent - 5.0.9-2 - BitTorrent is a scatter-gather network file transfer tool.
  • py25-bluez - 0.9.2-1 - Python wrappers around bluez.
  • py25-boto - 1.9b-1 - Python interface to Amazon Web Services
  • py25-buildutils - 0.1.2-1 - buildutils provides several new commands for your package setup.py file to help make development easier.
  • py25-bzr - 2.3.3-1 - A decentralized revision control system designed to be easy for developers and end users alike.
  • py25-bzr-rewrite - 0.6.2-1 - Revision rewrite plugin for bzr.
  • py25-bzr-svn - 1.0.4-1 - Support for Subversion branches in Bazaar.
  • py25-bzrtools - 2.2.0-1 - A set of plugins for Bazaar.
  • py25-celementtree - 1.0.5-20051216-5 - A toolkit that contains a number of light-weight components for working with XML (C implementation).
  • py25-cheetah - 2.4.2.1-1 - Cheetah - The Python-Powered Template Engine.
  • py25-cherokee-scgi - 1.14-1 - PySCGI is a 100% Python module implementing the SCGI protocol. It can be used to write Python-based application servers.
  • vpy25-cherrypy - 2.3.0-1 - A pythonic, object-oriented web development framework.
  • py25-cjson - 1.0.5-1 - A very fast JSON encoder/decoder for Python.
  • py25-clips - 1.0.7.348-1 - PyCLIPS is an extension module that embeds full CLIPS functionality in Python applications.
  • py25-configobj - 4.7.2-1 - A simple but powerful config file reader and writer in Python.
  • py25-constraint - 1.1-3 - A Python module offering solvers for Constraint Solving Problems (CSPs) over finite domains in simple and pure Python.
  • py25-crypto - 2.1.0-2 - Python Cryptography Toolkit.
  • py25-curl - 7.19.0-1 - PycURL is a Python interface to libcurl.
  • py25-dbus-python - 0.83.0-2 - Python bindings to DBUS
  • py25-decorator - 3.2.0-1 - A library of helper functions intended to make writing templates in web applications easier.
  • py25-decoratortools - 1.7-2 - Class and function decoratortoolss.
  • py25-django - 1.1.2-1 - A high-level Python Web framework that encourages rapid development and clean, pragmatic design.
  • py25-docutils - 0.7-1 - An open-source text processing system for processing plaintext documentation into useful formats.
  • py25-duplicity - 0.6.13-1 - Encrypted bandwidth-efficient backup using the rsync algorithm
  • py25-elementtree - 1.2.6-20050316-5 - A toolkit that contains a number of light-weight components for working with XML.
  • py25-epsilon - 0.5.12-1 - A small python utility package.
  • py25-feedparser - 4.1-1 - Parse RSS and Atom feeds in Python.
  • py25-flup - 1.0.2-1 - A collection of python WSGI modules including those speaking AJP 1.3, FastCGI and SCGI.
  • py25-formencode - 1.2.2-1 - A form generation and validation package for python.
  • py25-gd - 0.56-4 - GD module is an interface to the GD library.
  • py25-gdchart2 - Beta1-4 - PyGDChart is a set of Python bindings for the GDChart library.
  • py25-genshi - 0.6-1 - A toolkit for stream-based generation of output for the web.
  • py25-getmail - 4.20.4-1 - getmail is a mail retriever designed to allow you to get your mail from one or more mail accounts on various mail servers to yo
  • py25-gnosis-utils - 1.2.1-1 - Gnosis Utilities contains a number of Python libraries, most (but not all) related to working with XML.
  • py25-hellanzb - 0.13-2 - Hellanzb is a Python application designed for *nix environments that retrieves nzb files and fully processes them
  • py25-hgsubversion - 1.2-1 - hgsubversion is an extension for Mercurial that allows using Mercurial as a Subversion client.
  • py25-hgsvn - 0.1.7-1 - A set of scripts to work locally on Subversion checkouts using Mercurial.
  • py25-ipython - 0.10.2-1 - An enhanced interactive Python shell
  • py25-kid - 0.9.6-2 - Pythonic XML-based Templating
  • py25-lxml - 2.2.8-1 - A Pythonic binding for the libxml2 and libxslt libraries.
  • py25-mako - 0.4.1-1 - Mako is a template library written in Python.
  • py25-mantissa - 0.6.22-1 - An extensible, multi-protocol, multi-user, interactive application server built on top of Axiom and Nevow.
  • py25-markdown - 2.0.3-1 - Python implementation of Markdown, a text-to-HTML conversion tool for web writers.
  • py25-mercurial - 1.9-1 - A fast, lightweight Source Control Management system designed for efficient handling of very large distributed projects.
  • py25-moin - 1.9.2-1 - MoinMoin is a nice and easy WikiEngine with advanced features, providing collaboration on easily editable web pages.
  • py25-mssql - 1.0.2-1 - Simple MSSQL Python extension module.
  • py25-mx-base - 3.1.3-1 - A collection of userful open source python packages from eGenix.com.
  • py25-myghty - 1.2-1 - A Python based web and templating framework.
  • py25-mysql - 1.2.3c1-1 - MySQL support for Python.
  • py25-nevow - 0.9.33-1 - A web application construction kit written in Python.
  • py25-nose - 1.0.0-1 - A discovery-based python unittest extension.
  • py25-openssl - 0.10-1 - Python wrapper around a small subset of the OpenSSL library.
  • py25-paramiko - 1.7.6-1 - ssh2 protocol for python.
  • py25-paste - 1.7.5.1-1 - Tools for using a Web Server Gateway Interface stack.
  • py25-pastedeploy - 1.3.3-1 - Load, configure, and compose WSGI applications and servers.
  • py25-pastescript - 1.7.3-2 - A pluggable command-line frontend, including commands to setup package file layouts.
  • py25-pastewebkit - 1.0-4 - A port/reimplementation of Webware WebKit in WSGI and Paste.
  • py25-pexpect - 2.4-1 - Python module for automating interactive applications.
  • py25-pgsql - 2.5.1-2 - A Python DB-API 2.0 compliant interface to PostgreSQL databases.
  • py25-pil - 1.1.7-1 - The Python Imaging Library (PIL) adds image processing capabilities to your Python interpreter.
  • py25-ply - 3.3-1 - A pure-Python implementation of lex and yacc.
  • py25-protocols - 1.0a0dev-r2082-5 - Python interface module.
  • py25-psycopg - 1.1.21-6 - psycopg is a PostgreSQL database adapter for the Python programming language.
  • py25-psycopg2 - 2.3.2-1 - psycopg2 is a PostgreSQL database adapter for the Python programming language.
  • py25-pudge - 0.1.2-1 - A documentation generator for Python projects, using Restructured Text.
  • py25-pygments - 1.3.1-1 - Pygments is a syntax highlighting package written in Python.
  • py25-pygresql - 3.8.1-3 - Python module that interfaces to a PostgreSQL database.
  • py25-pylons - 0.9.6.2-2 - A lightweight web framework emphasizing flexibility and rapid development.
  • py25-pyrex - 0.9.8.6-1 - A Language for Writing Python Extension Modules.
  • py25-quixote - 2.6-1 - A highly Pythonic Web application framework.
  • py25-rdiff-backup - 1.2.8-1 - rdiff-backup backs up one directory to another, possibly over a network.
  • py25-reportlab - 2.1-2 - An Open Source Python library for generating PDFs and graphics.
  • py25-roundup - 1.4.16-1 - An issue-tracking system with command-line, web and e-mail interfaces.
  • py25-routes - 1.12.3-1 - Routing Recognition and Generation Tools.
  • py25-ruledispatch - 0.5a0.dev-r2303-2 - Python module for rule-based dispatching and generic functions.
  • py25-sabnzbd - 0.2.5-2 - A web-interface based binary newsgrabber written in python, with nzb file support.
  • py25-scgi - 1.14-1 - Server-side implementation of the SCGI protocol.
  • py25-selector - 0.8.11-1 - WSGI delegation based on URL path and method.
  • py25-serial - 2.5-1 - Python module encapsulating the access to serial port.
  • py25-setuptools - 0.6c11-2 - Tool to build and distribute Python packages, enhancement to distutils.
  • py25-silvercity - 0.9.7-1 - SilverCity is a lexing package, based on Scintilla, that can provide lexical analysis for over 20 programming and markup langau
  • py25-simplejson - 2.1.2-1 - Simple, fast, extensible JSON encoder/decoder for Python.
  • py25-simpy - 2.0.1-1 - An object-oriented, process-based discrete-event simulation language based on standard Python.
  • py25-sqlalchemy - 0.6.6-1 - Python SQL toolkit and Object Relational Mapper
  • py25-sqlobject - 0.15.0-1 - An object-relational mapper for python.
  • py25-statlib - 1.1-1 - Python statistics modules.
  • py25-subvertpy - 0.7.5-1 - Alternative Python bindings for Subversion, aiming to have complete, portable and Pythonic Python bindings.
  • py25-tailor - 0.9.35-1 - A tool to migrate changesets between various SCMs.
  • py25-trac - 0.12.1-1 - An enhanced wiki and issue tracking system for software development projects.
  • py25-turbocheetah - 1.0-2 - Python template plugin that supports use of Cheetah templates.
  • py25-turbogears - 1.1-1 - Rapid web development megaframework in Python.
  • py25-turbojson - 1.2.1-1 - Python template plugin that supports JSON.
  • py25-turbokid - 1.0.5-1 - Python template plugin that supports Kid templates.
  • py25-twisted - 9.0.0-1 - A networking engine written in Python.
  • py25-urwid - 0.9.9.1-1 - Urwid is a console user interface library in Python.
  • py25-usb - 0.4.1-1 - PyUSB is a native Python module written in C that provides USB access for it.
  • py25-weatherget - 0.4.0.1-2 - A command line based weather reporting tool written in python.
  • py25-webhelpers - 1.0-1 - A library of helper functions intended to make writing templates in web applications easier.
  • py25-webpy - 0.34-1 - A web framework for python that is as simple as it is powerful.
  • py25-xml - 0.8.4-4 - The PyXML package is a collection of libraries to process XML with Python.
  • py25-yaml - 3.09-1 - YAML parser and emitter for Python.
  • py25-yenc - 0.3-1 - A module that provides only raw yEnc encoding/decoding with builtin crc32 calculation (C implementation).
  • py25-zope-interface - 3.5.0-1 - A separate distribution of the zope.interface package used in Zope 3, along with the packages it depends on.
  • py26-axiom - 0.5.31-1 - An object database or object-relational mapper.
  • py26-beaker - 1.5.4-1 - A Session and Caching library with WSGI Middleware.
  • py26-bittorrent - 5.0.9-2 - BitTorrent is a scatter-gather network file transfer tool.
  • py26-boto - 1.9b-1 - Python interface to Amazon Web Services
  • py26-bzr - 2.3.3-1 - A decentralized revision control system designed to be easy for developers and end users alike.
  • py26-bzr-rewrite - 0.6.2-1 - Revision rewrite plugin for bzr.
  • py26-bzr-svn - 1.0.4-1 - Support for Subversion branches in Bazaar.
  • py26-bzrtools - 2.2.0-1 - A set of plugins for Bazaar.
  • py26-cheetah - 2.4.2.1-1 - Cheetah - The Python-Powered Template Engine.
  • py26-cherokee-scgi - 1.14-1 - PySCGI is a 100% Python module implementing the SCGI protocol. It can be used to write Python-based application servers.
  • py26-cjson - 1.0.5-1 - A very fast JSON encoder/decoder for Python.
  • py26-configobj - 4.7.2-1 - A simple but powerful config file reader and writer in Python.
  • py26-curl - 7.19.0-1 - PycURL is a Python interface to libcurl.
  • py26-dbus-python - 0.83.0-2 - Python bindings to DBUS
  • py26-decorator - 3.2.0-1 - A library of helper functions intended to make writing templates in web applications easier.
  • py26-django - 1.1.2-1 - A high-level Python Web framework that encourages rapid development and clean, pragmatic design.
  • py26-docutils - 0.7-1 - An open-source text processing system for processing plaintext documentation into useful formats.
  • py26-duplicity - 0.6.13-1 - Encrypted bandwidth-efficient backup using the rsync algorithm
  • py26-epsilon - 0.5.12-1 - A small python utility package.
  • py26-flup - 1.0.2-1 - A collection of python WSGI modules including those speaking AJP 1.3, FastCGI and SCGI.
  • py26-formencode - 1.2.2-1 - A form generation and validation package for python.
  • py26-genshi - 0.6-1 - A toolkit for stream-based generation of output for the web.
  • py26-getmail - 4.20.4-1 - getmail is a mail retriever designed to allow you to get your mail from one or more mail accounts on various mail servers to yo
  • py26-hgsvn - 0.1.7-1 - A set of scripts to work locally on Subversion checkouts using Mercurial.
  • py26-ipython - 0.10.2-1 - An enhanced interactive Python shell
  • py26-lepl - 5.0.0-1 - A Parser Library for Python with Recursive Descent and Full Backtracking
  • py26-lxml - 2.2.8-1 - A Pythonic binding for the libxml2 and libxslt libraries.
  • py26-mako - 0.4.1-1 - Mako is a template library written in Python.
  • py26-mantissa - 0.6.22-1 - An extensible, multi-protocol, multi-user, interactive application server built on top of Axiom and Nevow.
  • py26-markdown - 2.0.3-1 - Python implementation of Markdown, a text-to-HTML conversion tool for web writers.
  • py26-mercurial - 1.9-1 - A fast, lightweight Source Control Management system designed for efficient handling of very large distributed projects.
  • py26-moin - 1.9.2-1 - MoinMoin is a nice and easy WikiEngine with advanced features, providing collaboration on easily editable web pages.
  • py26-mssql - 1.0.2-1 - Simple MSSQL Python extension module.
  • py26-mx-base - 3.1.3-1 - A collection of userful open source python packages from eGenix.com.
  • py26-myghty - 1.2-1 - A Python based web and templating framework.
  • py26-mysql - 1.2.3c1-1 - MySQL support for Python.
  • py26-nevow - 0.9.33-1 - A web application construction kit written in Python.
  • py26-nose - 1.0.0-1 - A discovery-based python unittest extension.
  • py26-openssl - 0.10-1 - Python wrapper around a small subset of the OpenSSL library.
  • py26-paramiko - 1.7.6-1 - ssh2 protocol for python.
  • py26-paste - 1.7.5.1-1 - Tools for using a Web Server Gateway Interface stack.
  • py26-pastedeploy - 1.3.3-1 - Load, configure, and compose WSGI applications and servers.
  • py26-pastescript - 1.7.3-2 - A pluggable command-line frontend, including commands to setup package file layouts.
  • py26-pastewebkit - 1.0-4 - A port/reimplementation of Webware WebKit in WSGI and Paste.
  • py26-pil - 1.1.7-1 - The Python Imaging Library (PIL) adds image processing capabilities to your Python interpreter.
  • py26-ply - 3.3-1 - A pure-Python implementation of lex and yacc.
  • py26-psycopg2 - 2.3.2-1 - psycopg2 is a PostgreSQL database adapter for the Python programming language.
  • py26-pygments - 1.3.1-1 - Pygments is a syntax highlighting package written in Python.
  • py26-pylons - 0.9.6.2-2 - A lightweight web framework emphasizing flexibility and rapid development.
  • py26-pyrex - 0.9.8.6-1 - A Language for Writing Python Extension Modules.
  • py26-quixote - 2.6-1 - A highly Pythonic Web application framework.
  • py26-rdiff-backup - 1.2.8-1 - rdiff-backup backs up one directory to another, possibly over a network.
  • py26-roundup - 1.4.16-1 - An issue-tracking system with command-line, web and e-mail interfaces.
  • py26-routes - 1.12.3-1 - Routing Recognition and Generation Tools.
  • py26-scgi - 1.14-1 - Server-side implementation of the SCGI protocol.
  • py26-serial - 2.5-1 - Python module encapsulating the access to serial port.
  • py26-setuptools - 0.6c11-2 - Tool to build and distribute Python packages, enhancement to distutils.
  • py26-simplejson - 2.1.2-1 - Simple, fast, extensible JSON encoder/decoder for Python.
  • py26-simpy - 2.0.1-1 - An object-oriented, process-based discrete-event simulation language based on standard Python.
  • py26-sqlalchemy - 0.6.6-1 - Python SQL toolkit and Object Relational Mapper
  • py26-sqlobject - 0.15.0-1 - An object-relational mapper for python.
  • py26-statlib - 1.1-1 - Python statistics modules.
  • py26-subvertpy - 0.7.5-1 - Alternative Python bindings for Subversion, aiming to have complete, portable and Pythonic Python bindings.
  • py26-tailor - 0.9.35-1 - A tool to migrate changesets between various SCMs.
  • py26-trac - 0.12.1-1 - An enhanced wiki and issue tracking system for software development projects.
  • py26-turbogears - 1.1-1 - Rapid web development megaframework in Python.
  • py26-turbokid - 1.0.5-1 - Python template plugin that supports Kid templates.
  • py26-twisted - 9.0.0-1 - A networking engine written in Python.
  • py26-urwid - 0.9.9.1-1 - Urwid is a console user interface library in Python.
  • py26-weatherget - 0.4.0.1-2 - A command line based weather reporting tool written in python.
  • py26-webhelpers - 1.0-1 - A library of helper functions intended to make writing templates in web applications easier.
  • py26-webpy - 0.34-1 - A web framework for python that is as simple as it is powerful.
  • py26-yaml - 3.09-1 - YAML parser and emitter for Python.
  • py26-zope-interface - 3.5.0-1 - A separate distribution of the zope.interface package used in Zope 3, along with the packages it depends on.
  • py27-mercurial - 1.9-1 - A fast, lightweight Source Control Management system designed for efficient handling of very large distributed projects.
  • py27-setuptools - 0.6c11-2 - Tool to build and distribute Python packages, enhancement to distutils.
  • python - 2.5-1 - This is a package that sets up the default python.
  • python24 - 2.4.6-2 - Python is an interpreted, interactive, object-oriented programming language.
  • python25 - 2.5.6-1 - Python is an interpreted, interactive, object-oriented programming language.
  • python26 - 2.6.7-1 - Python is an interpreted, interactive, object-oriented programming language.
  • python27 - 2.7.2-1 - Python is an interpreted, interactive, object-oriented programming language.
  • python3 - 3.2.1-1 - Python is an interpreted, interactive, object-oriented programming language.
  • qemacs - 0.3.1-1 - QEmacs (for Quick Emacs) is a very small but powerful UNIX editor.
  • qpopper - 4.0.19-1 - qpopper is a pop3 server
  • quagga - 0.99.16-1 - The quagga routing suite, including ospf, rip, and bgp (ospf6d and ripngd are included if library has IPv6 support).
  • quilt - 0.48-5 - A set of scripts to manage a series of patches.
  • quilt-lite - 0.48-5 - A set of scripts to manage a series of patches.
  • radiusclient-ng - 0.5.6-1 - easy-to-use and standard compliant library suitable for developing free and commercial software that need support for a RADIUS
  • rc - 1.7.2-1 - A port of the AT&T Plan 9 shell.
  • rc5pipe - 1.1-1 - a small unix utility that will decrypt everthing from stdin to stdout using the algorithm RC5-32/12/16
  • rcs - 5.7-2 - The Revision Control System (RCS) manages multiple revisions of files.
  • rdate - 1.4-2 - Using RFC868, retrieves a remote date and time and sets the local time
  • re2c - 0.13.5-1 - re2c is a tool for writing very fast and very flexible scanners.
  • readline - 6.1-2 - The GNU Readline library provides a set of functions for use by applications that allow users to edit command lines as they are
  • recode - 3.6-3 - The recode library converts files between character sets and usages.
  • recordext - 1.13+cvs20050130-2 - X record extension headers
  • redir - 2.2.1-1 - A port redirector.
  • renderext - 0.8+cvs20050130-2 - X render extension headers
  • rhtvision - 2.0.3-1 - Turbo Vision (TVision for short) is a TUI (Text User Interface) that implements the well known CUA widgets. TVision was origina
  • rlfe - 6.1-3 - Readline front-end, add readline to command line programs.
  • rlwrap - 0.37-1 - A 'readline wrapper'.
  • rrdcollect - 0.2.9-1 - A system for reading system statistical data and feeding it to RRDtool
  • rrdtool - 1.2.30-1 - Round-Robin Database tool. Database collator and plotter
  • rsnapshot - 1.3.1-1 - A filesystem snapshot utility based on rsync.
  • rsstail - 1.7-1 - RSSTail is more or less an rss reader.
  • rsync - 3.0.8-1 - fast remote file copy program (like rcp)
  • rtorrent - 0.8.6-1 - rtorrent is a BitTorrent client for ncurses, using the libtorrent library.
  • rtpproxy - 1.1-1 - RTPproxy is a proxy for RTP streams that can help SER/OpenSER handle NAT situations, as well as proxy IP telephony between IPv4
  • ruby - 1.9.1.243-1 - An interpreted scripting language for quick and easy object-oriented programming.
  • rubygems - 1.1.1-1 - Ruby packaging and installation framework.
  • rxtx - 2.1.7r2-1 - Java serial and parallel communication library with JNI.
  • sablevm - 1.13-2 - A robust, extremely portable, efficient, and specifications-compliant JVM.
  • sabnzbdplus - 0.5.6-1 - A web-interface based binary newsgrabber written in python, with nzb file support.
  • samba - 3.2.15-4 - Samba suite provides file and print services to SMB/CIFS clients.
  • samba2 - 2.2.12-4 - Lightweight Samba suite provides file and print services to SMB/CIFS clients.
  • samba3-dev - 3.2.15-4 - development files for samba3
  • samba3-swat - 3.2.15-4 - the Samba Web Admin Tool for samba3
  • samba34 - 3.4.13-2 - Samba suite provides file and print services to SMB/CIFS clients. This is a newer version.
  • samba34-dev - 3.4.13-2 - development files for samba34
  • samba34-swat - 3.4.13-2 - the Samba Web Admin Tool for samba34
  • samba35 - 3.5.9-1 - Samba suite provides file and print services to SMB/CIFS clients. This is a newer version.
  • samba35-dev - 3.5.9-1 - development files for samba35
  • samba35-swat - 3.5.9-1 - the Samba Web Admin Tool for samba35
  • sane-backends - 1.0.22-1 - SANE is a universal scanner interface
  • scli - 0.3.1-3 - SNMP Command Line Interface.
  • scons - 2.0.1-1 - An improved, cross-platform substitute for the classic Make utility with integrated functionality similar to autoconf/automake
  • scponly - 4.8-1 - A shell for users with scp/sftp only access
  • screen - 4.0.3-2 - A screen manager that supports multiple logins on single terminal
  • scsi-idle - 2.4.23-2 - SCSI disks and a daemon that spins down drives when idle - kernel patch needed for spin-up
  • sdl - 1.2.11-2 - Simple direct media library.
  • sdl-dev - 1.2.11-2 - Development stuff for native compiling SDL apps.
  • sdparm - 1.06-1 - Utility for listing and potentially changing SCSI disk parameters
  • sed - 4.2.1-1 - Stream editor.
  • sendmail - 8.14.2-1 - The most classic SMTP server.
  • ser - 0.8.14-5 - SIP Express Router
  • ser2net - 2.5-1 - ser2net is a serial port to network proxy
  • setpwc - 1.2-1 - Set and list settings of WebCams with the 'PWC chipset'
  • setserial - 2.17-1 - configuration utility for serial ports
  • sg3-utils - 1.25-1 - Utilities that send SCSI commands to devices.
  • sharutils - 4.10-1 - Create and unpack shell archives.
  • shntool - 3.0.10-1 - A multi-purpose WAVE data (compressed or not) processing and reporting utility.
  • silc-client - 1.1.6-1 - Secure Internet Live Conferencing client.
  • simh - 38.1-2 - A highly portable, multi-system emulators.
  • sipcalc - 1.1.4-1 - Sipcalc is an advanced console based ip subnet calculator.
  • siproxd - 0.8.0+06May2011-1 - Siproxd is a proxy/masquerading daemon for the SIP protocol
  • sispmctl - 2.7-1 - Control software for the SiS-PM intiligent power supply
  • slang - 2.1.4-1 - S-Lang is a multi-platform library designed to allow a developer to create robust multi-platform software.
  • slimrat - 1.0-1 - Utility for downloading files from Rapidshare (free) and a few other servers.
  • slimserver - 6.5.4-13 - Streaming Audio Server
  • slrn - 0.9.9p1-1 - slrn (s-lang read news) is a newsreader run in console mode.
  • slsc - 0.2.3-1 - S-Language port of the classic SC spreadsheet.
  • smartmontools - 5.40-3 - Utility programs to control and monitor (SMART) built into most modern ATA and SCSI hard disks.
  • snort - 2.8.6.1-1 - A lightweight network intrusion detection system.
  • snownews - 1.5.12-1 - Text mode RSS newsreader for Linux and Unix
  • socat - 1.7.1.3-1 - A relay for bidirectional data transfer between two independent data channels.
  • softflowd - 0.9.8-3 - Softflowd is flow-based network traffic analyser capable of Cisco NetFlow(tm) data export.
  • sox - 14.2.0-3 - Sound eXchange, command line utility that can convert various formats of audio files.
  • spamassassin - 3.1.8-1 - a spam filter for email which can be invoked from mail delivery agents
  • spandsp - 0.0.4pre12-1 - A DSP library for telephony.
  • spawn-fcgi - 1.6.3-1 - spawn-fcgi is used to spawn fastcgi applications
  • speex - 1.2rc1-2 - Speex is an Open Source/Free Software patent-free audio compression format designed for speech.
  • spindown - 1.0-1 - The spindown program stops spinning a SCSI disk if it is idle for a while.
  • splix - 2.0.0-1 - Splix is a driver for printers that speak SPL (Samsung Printer Language). This includes printers made by Samsung, Dell, and Xer
  • sqlite - 3.7.3-1 - SQLite is a small C library that implements a self-contained, embeddable, zero-configuration SQL database engine.
  • sqlite2 - 2.8.17-3 - SQLite is a small C library that implements a self-contained, embeddable, zero-configuration SQL database engine.
  • sqsh - 2.1.5-4 - Command line SQL client for MS SQL and Sybase servers.
  • squeak - 3.9.9-2 - Squeak is a full-featured implementation of the Smalltalk programming language and environment.
  • squeezecenter - 7.3.3-1 - Streaming Audio Server for Logitech Squeezebox
  • squid - 2.7.9-1 - Full-featured Web proxy cache, with smaller footprint than 3.x
  • squid3 - 3.1.8-1 - Full-featured Web proxy cache.
  • srelay - 0.4.6-1 - Socks proxy server.
  • ssam - 1.10-1 - A stream editor that uses the UTF routines and understands the sam command set. It is analogous to sed.
  • sslwrap - 206-1 - sslwrap is a simple Unix service that sits over any simple TCP service such as POP3, IMAP, SMTP, and encrypts all of the data o
  • stgit - 0.15-1 - StGit is a Python application providing similar functionality to Quilt (i.e. pushing/popping patches to/from a stack) on top of
  • stow - 1.3.3-2 - This is GNU Stow, a program for managing the installation of software packages, keeping them separate while making them appear
  • strace - 4.5.20-1 - Traces all system calls a program makes.
  • streamripper - 1.64.6-1 - Shoutcast ripper
  • stunnel - 4.26-2 - SSL encryption wrapper for all kinds of servers
  • stupid-ftpd - 1.5beta-1 - FTP server with ftp-daemon functionality and a command-line mode.
  • sudo - 1.7.4.6-1 - System utility to execute commands as the superuser
  • surfraw - 2.2.8-1 - Surfraw (Shell Users Revolutionary Front Rage Against the Web) provides CLI to a variety of popular Web search engines and site
  • svn - 1.6.15-1 - a compelling replacement for CVS
  • svn-pl - 1.6.15-1 - perl SWIG binding for subversion
  • svn-py - 1.6.15-1 - python SWIG binding for subversion
  • swi-prolog - 5.6.52-2 - An LGPL comprehensive portable Prolog implementation.
  • swig - 1.3.39-1 - Simplified Wrapper and Interface Generator
  • syslog-ng - 2.0.10-2 - Syslog replacement logging on behalf of remote hosts
  • sysstat - 9.0.3-1 - System performance tools for linux os
  • taged - 3.0-3 - command line utility that can create and modify ID3 data
  • tar - 1.25-1 - heavyweight version of the Tape ARchiver
  • tcl - 8.4.19-2 - The Tool Command Language
  • tcpdump - 4.0.0-1 - tcpdump dumps the traffic on a network
  • tcpflow - 0.21-3 - tcpflow is a program that captures data transmitted as part of TCP connections (flows), and stores the data in a way that is co
  • tcpwrappers - 7.6-4 - A library that allows IP level control over ports
  • tcsh - 6.17.00-1 - C shell with file name completion and command line editing.
  • termcap - 1.3.1-2 - Terminal emulation library
  • tesseract-ocr - 2.03-3 - An OCR Engine
  • tesseract-ocr-dev - 2.03-3 - An OCR Engine, devel files
  • tesseract-ocr-lang-deu - 2.03-3 - An OCR Engine, deu language files
  • tesseract-ocr-lang-deu-f - 2.03-3 - An OCR Engine, deu-f language files
  • tesseract-ocr-lang-eng - 2.03-3 - An OCR Engine, eng language files
  • tesseract-ocr-lang-fra - 2.03-3 - An OCR Engine, fra language files
  • tesseract-ocr-lang-ita - 2.03-3 - An OCR Engine, ita language files
  • tesseract-ocr-lang-nld - 2.03-3 - An OCR Engine, nld language files
  • tesseract-ocr-lang-por - 2.03-3 - An OCR Engine, por language files
  • tesseract-ocr-lang-spa - 2.03-3 - An OCR Engine, spa language files
  • tesseract-ocr-lang-vie - 2.03-3 - An OCR Engine, vie language files
  • texinfo - 4.11-1 - The GNU Documentation System.
  • textutils - 2.1-5 - GNU Text Utilities
  • tftp-hpa - 5.0-1 - A tftp package
  • thttpd - 2.25b-5 - thttpd is a lightweight http server
  • tig - 0.17-1 - Tig is a git repository browser that additionally can act as a pager for output from various git commands.
  • tin - 1.8.3-1 - tin is a threaded NNTP and spool based UseNet newsreader
  • tinyproxy - 1.8.2-1 - Tinyproxy is a fast light-weight HTTP proxy.
  • tinyscheme - 1.37-1 - An implementation of the algorithmic language Scheme that aims to very small memory footprint while being as close to R5RS as p
  • tmsnc - 0.3.2-1 - Text-based MSN client.
  • tnef - 1.4.2-2 - TNEF is a program for unpacking ms-tnef type MIME attachments
  • tnftp - 20100108-1 - tnftp (formerly lukemftp) is what many users affectionately call the enhanced ftp client in NetBSD.
  • tnftpd - 20100324-1 - tnftpd (formerly lukemftpd) is a port of the NetBSD FTP server to other systems.
  • toppyweb - 3.3.3-2 - Manage your Topfield PVR Timers and Recordings over the Internet
  • tor - 0.2.1.30-1 - Connection-oriented anonymizing communication service
  • torrent - 1.4-7 - a collection of scripts that processes torrent files
  • torrentflux - 2.4-5 - TorrentFlux is an web-based system for managing bit torrent file transfers.
  • torsocks - 1.0-gamma-1 - A transparent SOCKS proxy for use with tor
  • transcode - 1.0.7-1 - Transcode is a suite of tools, all of which are command line utilities, for transcoding various video, audio, and container for
  • transmission - 2.32-1 - Lightweight BitTorrent client and daemon, with web interface bundled.
  • transmissiond - 1.42-1 - lightweight BitTorrent daemon with CGI WWW interface
  • tre - 0.8.0-1 - a lightweight, robust, efficient, portable, and POSIX compliant regexp matching library.
  • tree - 1.5.1.2-1 - list contents of directories in a tree-like format.
  • trickle - 1.06-3 - Trickle is a portable lightweight userspace bandwidth shaper.
  • tshark - 1.4.6-1 - Terminal based wireshark to dump and analyze network traffic
  • tsocks - 1.8beta5-4 - Transparent SOCKS proxying library.
  • ttf-bitstream-vera - 1.10-1 - Bitstream Vera truetype font, for use with fontconfig, freetype, and xft
  • tz - 2011g-1 - Timezone utilities and data.
  • tzwatch - 1.4.4-1 - Displays time and date in specified time zones on console.
  • ucl - 1.03-1 - UCL is a portable lossless data compression library written in ANSI C.
  • uclibc-opt - 0.9.28-13 - micro C library for embedded Linux systems
  • ulogd - 1.24-1 - A userspace logging daemon for netfilter/iptables
  • unarj - 2.65-1 - unarj - An uncompressor for .arj format archive files
  • unfs3 - 0.9.22-1 - Version 3 NFS server (not recommended, use nfs-utils instead)
  • units - 1.88-1 - GNU units converts between different systems of units.
  • unixodbc - 2.2.14-1 - ODBC is an open specification for providing application developers with a predictable API with which to access Data Sources.
  • unrar - 3.9.8-1 - unrar is an application that can decompress files and archives created using the RAR compression scheme
  • unrtf - 0.20.5-1 - A command-line program written in C which converts documents in Rich Text Format (.rtf) to HTML, LaTeX, PostScript, and other f
  • unzip - 6.0-2 - A (de)compression library for the ZIP format
  • up-imapproxy - 1.2.5-1 - proxies IMAP transactions between an IMAP client and an IMAP server
  • updatedd - 2.6-1 - Updatedd is a Dynamic DNS client with plugins for several dynamic dns services.
  • upslug2 - 0.0+svn0040-2 - Slug upgrade server
  • upx - 3.02-1 - UPX is a free, portable, extendable, high-performance executable packer for several different executable formats.
  • usbutils - 0.73-3 - USB enumeration utilities
  • ushare - 1.1a-2 - A free UPnP A/V Media Server for Linux.
  • utelnetd - 0.1.9-2 - The utelnetd package provides a small and efficient stand alone telnet server daemon.
  • utf8proc - 1.1.5-1 - utf8proc is a library for processing UTF-8 encoded Unicode strings.
  • util-linux - 2.12r-6 - A suite of essential utilities for any Linux system.
  • util-linux-ng - 2.15-2 - A suite of essential utilities for any Linux system, this version is a fork of util-linux.
  • vblade - 19-1 - vblade makes a seekable file available over ATA over Ethernet
  • vdr-mediamvp - 0.1.4-6 - A media server for the Hauppauge MediaMVP
  • vim - 7.3-2 - Yet another version of the vi editor.
  • vitetris - 0.57-1 - vitetris is a Tetris clone for the terminal that does not use ncurses.
  • vlc - 0.9.9a-2 - VLC is a cross-platform media player and streaming server.
  • vnstat - 1.10-2 - Network traffic monitor with log
  • vorbis-tools - 1.1.1-5 - A set of tools to manipulate ogg-vorbis files.
  • vpnc - 0.5.3-1 - Client for Cisco VPN concentrator
  • vsftpd - 2.3.4-1 - ftp daemon with an emphasis on speed and security
  • vtun - 3.0.2-2 - Virtual Tunnels over TCP/IP networks with traffic shaping, compression, and encryption.
  • w3cam - 0.7.2-3 - w3cam is a simple CGI to retrieve images from a so called video4linux device
  • w3m - 0.5.3-1 - Pager/text-based WWW browser with tables/frames support
  • wakelan - 1.1-2 - send the magic wakeup package over the LAN
  • wavpack - 4.50.1-1 - WavPack is a completely open audio compression format providing lossless, high-quality lossy, and a unique hybrid compression m
  • webalizer - 2.21-02-1 - Webalizer is a webserver stats program.
  • weechat - 0.3.5-1 - (Wee Enhanced Environment for Chat) is a fast and light IRC client.
  • werc - 1.2.3-1 - A sane web anti-framework
  • wget - 1.12-2 - A network utility to retrieve files from the Web
  • wget-ssl - 1.12-2 - A network utility to retrieve files from the Web
  • which - 2.20-1 - which prints out the full path of the executablesthat bash(1) would execute when the passed program names would have been enter
  • whois - 5.0.10-1 - Perform whois lookups to identify site owners
  • wizd - 0_12h_pvb_24-2 - Mediaserver program for IO-DATA and other players
  • wpa-supplicant - 0.5.8-3 - wpa_supplicant is a WPA Supplicant for Linux, BSD and Windows with support for WPA and WPA2 (IEEE 802.11i / RSN)
  • wput - 0.6.2-1 - A command-line ftp-client that uploads files or whole directories to remote ftp-servers.
  • wxbase - 2.8.12-1 - wxbase is a basic (non-windows) part of wxWidget toolkit
  • x11 - 6.2.1+cvs20050209-3 - X protocol library
  • x264 - 0.0.20090220-svn2245-1 - A free library for encoding H264/AVC video streams.
  • xau - 0.1.1+cvs20050130-2 - X authorization library
  • xdmcp - 0.1.3+cvs20050130-2 - XDMCP protocol library
  • xdpyinfo - 0.0cvs20050130-1 - X display information utility
  • xext - 6.4.3+cvs20050130-2 - X extensions library
  • xextensions - 1.0.2-2 - Headers for standard extensions to the X protocol
  • xinetd - 2.3.14-11 - Highly configurable, modular and secure inetd
  • xmail - 1.25-4 - A combined easy to configure SMTP, POP3 and Finger server.
  • xmlrpc-c - 1.11.00-3 - A library providing modular implementation of XML-RPC for C and C++.
  • xpdf - 3.02-1 - Various PDF tools (no support for X11 compiled in)
  • xpm - 3.5.2+cvs20050130-2 - X11 pixmap library
  • xproto - 6.6.2+cvs20050130-3 - X protocol headers
  • xtrans - 0.1+cvs20050130-2 - X transport headers
  • xtst - 6.2.2+cvs20050130-2 - X test library
  • xvid - 1.2.2-1 - Xvid is MPEG4 codec
  • xz-utils - 5.0.3-1 - A free general-purpose data compression software with high compression ratio
  • yafc - 1.1.1-2 - Yet Another FTP Client.
  • yasm - 1.1.0-1 - Yasm Modular Assembler, currently for x86 or x86_64.
  • yawk - 2.0.0-beta5-1 - yawk is a wiki clone written in gawk. It supports the usual text styles, lists, and tables. Additional and optional features ar
  • yougrabber - 0.29.4-1 - YouGrabber is a lightweight, multi-threaded (NPTL based) command line YouTube.com video downloader.
  • zile - 2.3.24-1 - Zile is Lossy Emacs, a small, fast, and powerful Emacs clone.
  • zip - 3.0-1 - a compression and file packaging utility.
  • zlib - 1.2.5-1 - zlib is a library implementing the 'deflate' compression system.
  • zoo - 2.10-1 - zoo - File archiving utility with compression
  • zsh - 4.3.10-1 - Zsh is a shell designed for interactive use.


Produced with:
ipkg list |awk '{print "* " $0}'
If you want to view a current, up-to-date list of optware via SSH/telnet, run this:
ipkg update
  ipkg list |awk '{print "* " $0}'|more
Or if you want to save it to a file:
ipkg list | tee programs.txt
  vi programs.txt