I9100 warning triangle
Getting rid of that pesky warning triangle during boot
It is definitely possible to remove that pesky warning triangle during boot when running a custom kernel, though you should be well aware that this method does NOT reset the custom kernel flash counter. The steps are not complicated, but they aren't easy either, so read well.
(1) Make sure you have CF-Root flashed (see the first post). You must have the "CWM Manager" app available.
(2) Make sure you have the same version of CF-Root extracted until you have the zImage file. (ZIP --> extract --> TAR --> extract --> zImage).
(3) Push the zImage file to /sdcard . It must still be called zImage !
(4) Find an original Samsung signed stock kernel (preferably from the same stock firmware you have, but it's not terribly important)
(5) Reboot into download mode (adb reboot download, or boot the device with home and volume-down pressed)
(6) Fire up ODIN, and flash the Samsung kernel
(7) Boot the device with the stock kernel. CWM Manager will still be available.
(8) Start CWM Manager, select Flash Kernel, and select the zImage from CF-Root you previously put on your SD-card. The kernel will flash and the device will reboot.
(9) You will now notice you no longer have the warning triangle during boot, but you are actually running CF-Root with all it's goodies!
(10) In the future, if you only use the Flash Kernel option inside CWM Manager instead of ODIN, the triangle will not return, neither will your flash counter increase. But keep in mind, that CWM Manager can only handle a direct "zImage" if you are NOT running a kernel with full busybox support (this is currently needed for flashing kernels out of .TAR and .ZIP files)
It is definitely possible to remove that pesky warning triangle during boot when running a custom kernel, though you should be well aware that this method does NOT reset the custom kernel flash counter. The steps are not complicated, but they aren't easy either, so read well.
(1) Make sure you have CF-Root flashed (see the first post). You must have the "CWM Manager" app available.
(2) Make sure you have the same version of CF-Root extracted until you have the zImage file. (ZIP --> extract --> TAR --> extract --> zImage).
(3) Push the zImage file to /sdcard . It must still be called zImage !
(4) Find an original Samsung signed stock kernel (preferably from the same stock firmware you have, but it's not terribly important)
(5) Reboot into download mode (adb reboot download, or boot the device with home and volume-down pressed)
(6) Fire up ODIN, and flash the Samsung kernel
(7) Boot the device with the stock kernel. CWM Manager will still be available.
(8) Start CWM Manager, select Flash Kernel, and select the zImage from CF-Root you previously put on your SD-card. The kernel will flash and the device will reboot.
(9) You will now notice you no longer have the warning triangle during boot, but you are actually running CF-Root with all it's goodies!
(10) In the future, if you only use the Flash Kernel option inside CWM Manager instead of ODIN, the triangle will not return, neither will your flash counter increase. But keep in mind, that CWM Manager can only handle a direct "zImage" if you are NOT running a kernel with full busybox support (this is currently needed for flashing kernels out of .TAR and .ZIP files)
Nenhum comentário:
Postar um comentário